Thermohydraulic Fittings Archivi

PE female/female formed fittings for double wall corrugated pipes for Non-pressure networks

Admin-2@tubiNet2023-05-16T20:38:19+02:00

INJECTION MOULDED FITTINGS FOR PE AND PP CORRUGATED PIPELINE

BRIEF DESCRIPTION

Moulded fittings made of polyethylene for corrugated pipes which find application in sewerage and drainage systems without pressure. They are available in black colour, in standard shapes and angles with both ends provided with joint socket.

MAIN FEATURES

Wide range of diameters and shapes
Provided with joint socket on both ends
Smooth inner and outer surface
Lightweight and quick installation
High chemical and abrasion resistance
Inert to stray currents
Recyclable

Elbow 45°

Ø

160 | 200 | 250 | 315 | 350 | 400 | 500 | 630
.

Elbow 90°

Ø

160 | 200 | 250 | 315 | 350 | 400 | 500 | 630
.

45° TEE

Ø

160 | 200 | 250 | 315 | 350 | 400 | 500 | 630
.

90° TEE

Ø

160 | 200 | 250 | 315 | 350 | 400 | 500 | 630 | 701 | 800 | 935 | 1000 | 1200

45° elbow bend produced, up to DE 315 by injection molding in 100% HDPE and from DE 338 by rotational molding in 100% LLDPE , supplied by a UNI EN ISO 9001/2000 certified company.

90° elbow bend produced, up to DE 315 by injection molding in 100% HDPE and from DE 338 by rotational molding in 100% LLDPE , supplied by a UNI EN ISO 9001/2000 certified company.

90° TEE produced by injection molding in 100% HDPE, supplied by a UNI EN ISO 9001/2000 certified company.
.
.

90° TEE bend produced by rotational molding in 100% LLDPE , supplied by a UNI EN ISO 9001/2000 certified company.
.
.

Reducing M/F

Ø

da 160 a 200
da 125 a 160
.
.

Gasket

Ø

125 | 160 | 200 | 250 | 284 | 315 | 350 | 400 | 468 | 500 | 565 | 630 | 701 | 800 | 935 | 1000 | 1200

Coupler

Ø

125 | 160 | 200 | 250 | 315 | 338 | 400 | 452 | 500 | 630 | 701 | 800 | 935 | 1000 | 1200

Reducer produced by rotational molding in 100% LLDPE, in compliance with norm EN 13476-2, supplied by a UNI EN ISO 9001/2000 certified company.

COUPLERS DE …. pruduct by … (see tab. on reverse page) with dimensions in compliance with norm UNI EN 12201-3.
.
.

Injected moulded fittings for solid wall HDPE pipes

Admin-2@tubiNet2022-06-20T18:11:05+02:00

Injected moulded fittings for solid wall HDPE pipes

BRIEF DESCRIPTION

Injected HDPE moulded pieces for high density polyethylene pipes, with a smooth inner surface. The pieces are available in black colour and they can be connected trough butt-welding, with electrofusion fittings or mechanical fittings. SDR 17-11-7,4 range. They are used for the construction of systems for the fluids transport up to 25 bar pressure.

MAIN FEATURES

Wide range of shapes and diameters
Reliability
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption capacity
Recyclable

Electrofusion fittings Sabfuse

Admin-2@tubiNet2022-08-10T10:53:13+02:00

Electrofusion fittings Sabfuse

BRIEF DESCRIPTION

PE100 Electrofusion fittings for connecting elements of polyethylene pipes (coils, bars, folders with flanges, special pieces) with pressurized and non-pressurized pipelines for the distribution of gas and water (for human consumption too). The electrofusion fittings have an inner metallic thread that, thanks to the passage of electricity, generates the heat requested for the fusion of the polyethylene in the inner surface of the fitting and the outer surface of the pipe, thus allowing the welding between the two elements. This operation takes place through welding machines, powered by specific generators connected to the fitting through cables inside the specific pins. There are also the “fusion witnesses” which are useful for the visual inspection of the properly fusion. The installation instructions can be read automatically by the device trough the barcode reported on every single fitting. Wide range of shapes (sleeves, bends, derivations, TEE pieces etc..) and diameters to work at nominal pressures of 6, 10, 16 and 25 bars.

MAIN FEATURES

Complete system
High tightness reliability
Fusion on the outer surface of the pipe (the inner welding seam is not created)
Suitable for pressurized and non-pressurized systems, up to 25 bar

CERTIFICATES:

GOST_SABFUSE_2019

UNI EN 1555-3 SABFUSE

UNI EN 12201-3 SABFUSE

UNI EN ISO 15494_SABFUSE Cert.n°2096-2021 Rev.0

WATERMARK 1765_2024 list

WRAS_SABFUSE_1701500

PE male/male formed fittings for double wall corrugated pipes for Non-pressure networks

Admin-2@tubiNet2022-12-21T19:33:48+01:00

MAGNUM M/M SEGMENTED FITTINGS

BRIEF DESCRIPTION

Fittings consisting of double wall corrugated pipes of high density polyethylene (HDPE), smooth on the inside and corrugated on the outside. They are available in black colour with customised or standard shapes and angles and with both “male” end joints. Couplings and gaskets on request.

MAIN FEATURES

Wide range of diameters and shapes
Fittings can be customised
Ring stiffness: SN 4-8
Smooth on the inside and corrugated on the outside
Sleeve connections with gaskets
Lightweight and quick to install
High chemical and abrasion resistance
Inert to stray currents
Recyclable

RACCORDI FORMATI MAGNUM MM

Blueseal16 – Polypropylene compression fittings

Gallery

Blueseal16 – Polypropylene compression fittings

Admin-2@tubiNet2023-01-25T08:58:02+01:00

COMPRESSION FITTING BLUESEAL

Compression fittings made of polypropylene (PP) for connecting polyethylene (PE) pipes that find application in drinking water pipelines PN16. Fittings are provided with lip seal and anti-slipping crimping rings and the diameters range (DN) goes from 16 to 110 mm. The complete range of compression fittings consists of more than 300 items, including couplings, elbows, Tee pieces (90° C), caps and reductions. Among the various types there are also PE-copper transition fittings, PE-metal universal fittings, fittings with threaded inserts made of brass and finally, fittings with Viton gasket and PBT crimping ring for usage in presence of acids. When the water pipeline is subjected to pressure, the patented tightness system allows to push the gasket against the pipe wall thanks to the “slide-effect” which increase the tightness level. Blueseal is also available with the O-ring gasket and in blue or black colour.

MAIN FEATURES

High water tightness reliability
Ease and quick installation
Better tightness
Wide range of fittings
High shock absorption ability
Recyclable

CERTIFICATES:

SAB

Gost raccordi

Kiwa Uk

BULGARKONTROLA fittings

SAB fittings

SAB universal fittings UK

SAB raccordi

SAB blueseal

SAB blueseal Danimarca

SAB blueseal PN10

SAB blueseal PN16

ACS- SAB_compressione_universal_kit rame

BULGARKONTROLA_2021

Thermohydraulic Fittings

PE female/female formed fittings for double wall corrugated pipes for Non-pressure networks

INJECTION MOULDED FITTINGS FOR PE AND PP CORRUGATED PIPELINE

BRIEF DESCRIPTION

MAIN FEATURES

Injected moulded fittings for solid wall HDPE pipes

Injected moulded fittings for solid wall HDPE pipes

BRIEF DESCRIPTION

MAIN FEATURES

Electrofusion fittings Sabfuse

Electrofusion fittings Sabfuse

BRIEF DESCRIPTION

MAIN FEATURES

CERTIFICATES:

PE male/male formed fittings for double wall corrugated pipes for Non-pressure networks

MAGNUM M/M SEGMENTED FITTINGS

BRIEF DESCRIPTION

MAIN FEATURES

Blueseal16 – Polypropylene compression fittings

COMPRESSION FITTING BLUESEAL

MAIN FEATURES

CERTIFICATES:

SAB

Contact Us