Aquaculture

Injected moulded fittings for solid wall HDPE pipes

2022-06-20T18:11:05+02:00

Injected moulded fittings for solid wall HDPE pipes

BRIEF DESCRIPTION

Injected HDPE moulded pieces for high density polyethylene pipes, with a smooth inner surface. The pieces are available in black colour and they can be connected trough butt-welding, with electrofusion fittings or mechanical fittings. SDR 17-11-7,4 range. They are used for the construction of systems for the fluids transport up to 25 bar pressure.

MAIN FEATURES

Wide range of shapes and diameters
Reliability
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption capacity
Recyclable

YOU-TUBE

Electrofusion fittings Sabfuse

2022-08-10T10:53:13+02:00

Electrofusion fittings Sabfuse

BRIEF DESCRIPTION

PE100 Electrofusion fittings for connecting elements of polyethylene pipes (coils, bars, folders with flanges, special pieces) with pressurized and non-pressurized pipelines for the distribution of gas and water (for human consumption too). The electrofusion fittings have an inner metallic thread that, thanks to the passage of electricity, generates the heat requested for the fusion of the polyethylene in the inner surface of the fitting and the outer surface of the pipe, thus allowing the welding between the two elements. This operation takes place through welding machines, powered by specific generators connected to the fitting through cables inside the specific pins. There are also the “fusion witnesses” which are useful for the visual inspection of the properly fusion. The installation instructions can be read automatically by the device trough the barcode reported on every single fitting. Wide range of shapes (sleeves, bends, derivations, TEE pieces etc..) and diameters to work at nominal pressures of 6, 10, 16 and 25 bars.

MAIN FEATURES

Complete system
High tightness reliability
Fusion on the outer surface of the pipe (the inner welding seam is not created)
Suitable for pressurized and non-pressurized systems, up to 25 bar

PE 80 pipe for pressurized water networks

2021-07-22T11:09:46+02:00

PE 80 pipe for pressurized water networks

BRIEF DESCRIPTION

Solid wall pipes made of PE 80 (MRS 8 MPa – σS 6,3 MPa) with a smooth inner and outer surface, available in black colour (with or without external coextruded coloured stripes) or completely blue. Diameters (OD) go from 20 up to 1200 mm. Pipes can be delivered in coils and bars.

MAIN FEATURES

100% permanent water tightness
Good bending properties, particularly appreciated in manual applications in colder climate
Low modulus of elasticity
Plastic behavior in unstable circumstances
Wide range of diameters and pressure classes (sizing optimization)
Wide range of fittings and special pieces, standard and customized
Related to aqueducts, this pipe is in conformity with the EN 1622 standard about “determination of threshold of smell and taste”
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption capacity
Recyclable

YOU-TUBE

Solid wall PE 100 pipes for pressurized water networks

2024-07-02T09:26:18+02:00

Solid wall PE 100 pipes for pressurized water networks

BRIEF DESCRIPTION

Solid wall pipes made of PE 100 (MRS 10 MPa – σS 8 MPa) with a smooth inner and outer surface, available in black colour (with or without external coextruded coloured stripes) or completely blue.
Diameters (OD) go from 20 up to 1200 mm. Pipes can be delivered in coils or bars.

MAIN FEATURES

100% permanent and watertight seal
Pliability
Wide range of dimension and performance choice
Very high chemical, electrical and biological resistance
High abrasion resistance
Low elasticity modulus
Plastic behavior in unstable situations
Reduced number of joints
System Homogeneity
Lightness
More resistant to chemical agents compared to other materials
Security
Savings
Recyclable

YOU-TUBE

Items For Aquaculture

2021-07-20T17:38:31+02:00

 
 
CATALOGUE   CONTACT US  
 

ITEMS FOR AQUACULTURE SYSTEMS

The PE pipes are used for construction of cages and handrails.
Yellow PE signal buoys, used for state-owned coastal zones.
Pe brackets formed from tubing and sheets or moulded for tubes from OD 225 to OD 355mm.
The mooring buoys in rotomoulded PE are filled with high density polystyrene.
Solar powered autonomous marine lights.

 

Contact Us

    Privacy Policy

    * 1) I declare I read the Privacy policy of this website.
      2) We would like to use your personal data in order to keep you update through e-mails, instant messages, chats or phone calls on news and commercial offers concerning our products and services and the third parties ones, and also concerning other marketing activities mentioned in the C letter. Please note that you can always change your decision and refuse the processing of your personal data for marketing purposes by contacting us through the e-mail address privacy.systemgroup@tubi.net .
      3) We would like to share your personal data with the other companies that belong to “System Group” and the partners in order to be processed for commercial and marketing purposes.

    Go to Top