Irrigation pipes

IDROWELL – PVC solid wall pipes for boreholes

BRIEF DESCRIPTION

Solid wall pipes made of polyvinyl chloride (PVC) with smooth inner and outer surface, available in light blue colour (RAL 5012). The diameters range goes from (OD) 125 up to 500 mm, and pipes are delivered in bars of 3-5 m length, with glue socket connection system or with threaded male and female. This product is also available in these two versions:

• Slotted pipe for water collection
• With coating of pre-installed sock filter made of non-woven fabric

Pipes are used for coating boreholes for water extraction

MAIN FEATURES

PVC is stabilised with lead-free products (Pb)
Suitable for contact with water for human consumptions (D.M. n. 174 of April 6^th 2004)
Glue socket connections
Connections made through threaded ends tightening
High chemical resistance
Inert to stray currents

SGPVC Pressure – PVC solid wall pipes for water pressure networks

BRIEF DESCRIPTION

Solid wall pipes made of polyvinyl chloride (PVC-U), available in grey colour (RAL 7021). The diameters range (OD) goes from 50 up to 500 mm. Standard pipes are delivered in 6m lengths with a built-in socket provided with a gasket. Glue connection available on demand. They are used for the construction of pressurized piping systems (irrigation – water system – plant engineering and other industrial applications).

 MAIN FEATURES

PVC is stabilized with lead-free products (Pb)
Suitable for contact with water for human consumptions
Pressure classes: PN 6 – 10 – 12,5 – 16 – 20
Standard socket connections with lip-gasket sealing made of EPDM (EN 681)
On demand:

– Socket connections with ANGERLOCK gasket type (with hard insert made of PP). Cold insertion (EN 681)
– Socket connections with POWERLOCK gasket type (with hard insert made of PP). Warm insertion (EN 681)

Glue socket connections
Wide range of standard moulded fittings
High chemical and abrasion resistance
Inert to stray currents
It can be provided with PIPE TRACER , the 3D (altimetric map) tracking system for underground pipelines.

MAGO – SKY – SABTAPE – drip tape for irrigation

BRIEF DESCRIPTION

Continuous labyrinth drip tape for drip irrigation of horticultural and extensive crops with a maximum thickness of 15 mils (0.381 mm). These performing and efficient solutions allow to save water and increase the crops yield. Thanks to the large section labyrinth, which ensures a water turbulent flow and an high resistance to occlusions, they guarantee an uniform water and fertilizers distribution to the crops, with the best wing lengths available on the market. Our drip tape are manufactured with spacing of 10, 20, 30, and 40 cm, with a range of capacities that goes from 0,6 up to 2,0 l/h and a maximum thickness of 15 mil. There are 3 versions:

1. MaGo – high performances drip tape. It consists of an individual coextruded pipe and ensures high performances with the best wing lengths available on the market.
2. Sky – high quality drip tape produced through extrusion and subsequent walls gluing. It is more competitive than other drip tapes thanks to its thin thicknesses, especially in its tight spacing.
3. Sabtape – high quality drip tape produced through extrusion and subsequent walls gluing with the outer coextruded coloured stripe. It is the highly competitive solution thanks to its thin thicknesses, especially in its tight spacing.

MAIN FEATURES

Excellent uniformity of distribution
High resistance to occlusions
High water saving

DRIPLINE

BRIEF DESCRIPTION

Pipes made of polyethylene PE for drip irrigation, available in brown colour, with an OD of 16 mm and delivered in coils of 100 m. They are particularly recommended  for the irrigation of flowerbeds and decorative hedges, as well as for shrub, vineyards,  olive groves and fruit trees.

MAIN FEATURES

Easy to install
Reduced friction loss
Double version: standard and self-compensating
Excellent water distribution

TUBONE – smooth HD or MD PE pipes for self-propelled irrigation machines

BRIEF DESCRIPTION

Medium or high density polyethylene pipes, with inner and outer smooth surface, available in black colour. The diameters range (OD) goes from 40 up to 160 mm. Pipes are delivered in coils with various lengths depending on the client’s request. They are used for equip self-moving irrigating machines.

MAIN FEATURES

Good bending property
High abrasion resistance
Pipes can bear multiple windings and unwindings
Wide range of diameters and pressure classes (sizing optimization)
High chemical resistance (ISO/TR 10358)
High shock absorption ability
Recyclable

PE 80 pipe for pressurized water networks

BRIEF DESCRIPTION

Solid wall pipes made of PE 80 (MRS 8 MPa – σ_S 6,3 MPa) with a smooth inner and outer surface, available in black colour (with or without external coextruded coloured stripes) or completely blue. Diameters (OD) go from 20 up to 1200 mm. Pipes can be delivered in coils and bars.

MAIN FEATURES

100% permanent water tightness
Good bending properties, particularly appreciated in manual applications in colder climate
Low modulus of elasticity
Plastic behavior in unstable circumstances
Wide range of diameters and pressure classes (sizing optimization)
Wide range of fittings and special pieces, standard and customized
Related to aqueducts, this pipe is in conformity with the EN 1622 standard about “determination of threshold of smell and taste”
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption capacity
Recyclable

Solid wall PE 100 pipes for pressurized water networks

BRIEF DESCRIPTION

Solid wall pipes made of PE 100 (MRS 10 MPa – σ_S 8 MPa) with a smooth inner and outer surface, available in black colour (with or without external coextruded coloured stripes) or completely blue.
Diameters (OD) go from 20 up to 1200 mm. Pipes can be delivered in coils or bars.

MAIN FEATURES

100% permanent and watertight seal
Pliability
Wide range of dimension and performance choice
Very high chemical, electrical and biological resistance
High abrasion resistance
Low elasticity modulus
Plastic behavior in unstable situations
Reduced number of joints
System Homogeneity
Lightness
More resistant to chemical agents compared to other materials
Security
Savings
Recyclable

EuroPas Evolution – Solid wall PE 100 RC pipes (Resistant to Crack) type 1

BRIEF DESCRIPTION

Black high density polyethylene (HDPE) PE100 RC pipes (type1), with co-extruded blue stripes, for the transport of pressure water, for human consumption too, with product quality mark in compliance with (UNI) EN 12201-2 standard issued by an accredited independent organization according to UNI CEI EN ISO / IEC 17065/2012 and UNI CEI EN ISO / IEC 17020/2012 (certification of product conformity), and certified DIN PLUS in compliance with PAS 1075 technical standard.

MAIN FEATURES

Designed for trenchless tech. Installations
Higher service efficiency
More resistant to chemical agents
Compared to other materials
Longer life-span
Reduction / elimination of maintenance
Lower network management costs
Less disruption to users
Pipes completely compliant to the official standards
Correspondent to all types of connections
Advantageous cost/benefit ratio
Savings

EUROPAS SAFE10 Solid wall PE100 RC pipes (Resistant to Crack) type 2

BRIEF DESCRIPTION

High density polyethylene (HDPE) PE100 RC pipes, made with black inner layer (90%) and with blue outer layer (10%) – type 2, for the transport of pressure water, for human consumption too, with product quality mark in compliance with (UNI) EN 12201-2 standard issued by an accredited independent organization according to UNI CEI EN ISO / IEC 17065/2012 and UNI CEI EN ISO / IEC 17020/2012 (certification of product conformity), and certified DIN PLUS in compliance with PAS 1075 technical standard.

MAIN FEATURES

Detection of obligation to repair damage
When deeper than the colored external wall
Reduction / elimination of maintenance
Lower network management costs
Higher service efficiency
Less problems for final users
Longer life-span
Pipes completely compliant to the various standards
Correspondent to all types of connections
Suitable for no-dig
More resistant to chemical agents
Advantageous cost/benefit rapport
Savings

Plug&Play – coupler/socket for PE pressure pipes

BRIEF DESCRIPTION

Push-to-connect double coupler made of polypropylene (PP) for PE pipes up to PN16, provided with double lip sealing gaskets and special anti-slipping rings. Elbow and tee shapes are available too. The diameters range (DN) goes from 20 up to 250 mm (OD pipes), but is also possible to request reduced sizes. The range for PE100 PN16 pipes from ɸ 20 to 63 mm requires the adoption of a “pipe liner” inside the end of the pipe to be connected. The socket version is made of PE from DN 90 up to 250 mm (PN 16-10), then butt-welded on one end of the pipe in the factory before the shipment (on-site welding is possible too).

MAIN FEATURES

High tightness reliability
Easy and fast to install
Wide range of diameters
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High shock absorption capacity
Recyclable