MGI CLASS A

Solid wall PE 100 pipes for pressurized water networks

BRIEF DESCRIPTION

Solid wall pipes made of PE 100 (MRS 10 MPa – σ_S 8 MPa) with a smooth inner and outer surface, available in black colour (with or without external coextruded coloured stripes) or completely blue.
Diameters (OD) go from 20 up to 1200 mm. Pipes can be delivered in coils or bars.

MAIN FEATURES

100% permanent and watertight seal
Pliability
Wide range of dimension and performance choice
Very high chemical, electrical and biological resistance
High abrasion resistance
Low elasticity modulus
Plastic behavior in unstable situations
Reduced number of joints
System Homogeneity
Lightness
More resistant to chemical agents compared to other materials
Security
Savings
Recyclable

PE 100 Pipe for gas networks

BRIEF DESCRIPTION

Solid wall pipes made of PE 100 (MRS 10 MPa) with a smooth inner and outer surface, available in black colour with external coextruded orange stripes or completely yellow.
Diameters (OD) go from 20 up to 800 mm. Pipes can be delivered in coils or bars and find application in gas networks.

MAIN FEATURES

100% permanent gas tightness
Plastic behaviour in unstable situations
Wide range of diameters (sizing optimization)
Wide range of standard fittings
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High shock absorption capacity
Recyclable

DCR – Solid wall PE 100 DCR pipes for chlorinated water networks

BRIEF DESCRIPTION

Solid wall pipes made of PE 100 DCR (MRS 10 MPa – σ_S 8 MPa) with an inner and outer smooth surface, available in black colour (with or without external coextruded coloured stripes). The diameters range (OD) goes from 20 up to 1200 mm and pipes can be delivered in coils and bars. They are highly resistant to chlorine disinfectants used in water for human consumption.

MAIN FEATURES & BENEFITS

High resistance to chlorine aging effects DCR (Dioxide Chlorine Resistant)
100% permanent water tightness
Good bending properties
Plastic behaviour in unstable situations
Wide range of diameters and pressure classes (sizing optimization)
Wide range of fittings and special pieces, standard and customized
Related to aqueducts, this pipe is in conformity with the EN 1622 standard about “determination of threshold of smell and taste”
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption capacity
Recyclable

PE100 RC type 1 Pipe for gas “Europas Evolution”

BRIEF DESCRIPTION

Solid wall pipes made of PE 100 RC (MRS 10 MPa) with high resistance to Slow Crack Growth (SCG), smooth on the inside and the outside. Type 1 (1 layer) is available in black colour (with external orange coextruded stripes) or completely orange.
Diameters (OD) go from 20 up to 800 mm. Pipes can be delivered in coils or bars and they are used for the construction of GAS distribution systems.

MAIN FEATURES

High resistance to SCG from point loads and surface incisions
Particularly recommended for NO DIG installation techniques
100% permanent water tightness
Good bending properties
Plastic behaviour in unstable situations
Wide range of diameters (sizing optimization)
Wide range of standard fittings
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption capacity
Recyclable

EuroPas Evolution – Solid wall PE 100 RC pipes (Resistant to Crack) type 1

BRIEF DESCRIPTION

Black high density polyethylene (HDPE) PE100 RC pipes (type1), with co-extruded blue stripes, for the transport of pressure water, for human consumption too, with product quality mark in compliance with (UNI) EN 12201-2 standard issued by an accredited independent organization according to UNI CEI EN ISO / IEC 17065/2012 and UNI CEI EN ISO / IEC 17020/2012 (certification of product conformity), and certified DIN PLUS in compliance with PAS 1075 technical standard.

MAIN FEATURES

Designed for trenchless tech. Installations
Higher service efficiency
More resistant to chemical agents
Compared to other materials
Longer life-span
Reduction / elimination of maintenance
Lower network management costs
Less disruption to users
Pipes completely compliant to the official standards
Correspondent to all types of connections
Advantageous cost/benefit ratio
Savings

PE100 – RC type 2 pipe for gas”Europas Safe10″

BRIEF DESCRIPTION

Solid wall pipes made of PE 100 RC (MRS 10 MPa) with high resistance to Slow Crack Growth (SCG), smooth on the inside and the outside. Type 2 (2 layers) is available with inner black colour wall (90% of the thickness) + outer orange colour wall (10% of the thickness).
Diameters (OD) go from 20 up to 450 mm. Pipes are delivered in coils or bars and are used for the construction of GAS distribution systems.

MAIN FEATURES

High resistance to SCG from point loads and surface incisions
Particularly recommended for NO DIG installation techniques
100% permanent water tightness
Good bending properties
Plastic behaviour in unstable situations
Wide range of diameters (sizing optimization)
Wide range of standard fittings
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption capacity
It is recyclable

EUROPAS SAFE10 Solid wall PE100 RC pipes (Resistant to Crack) type 2

BRIEF DESCRIPTION

High density polyethylene (HDPE) PE100 RC pipes, made with black inner layer (90%) and with blue outer layer (10%) – type 2, for the transport of pressure water, for human consumption too, with product quality mark in compliance with (UNI) EN 12201-2 standard issued by an accredited independent organization according to UNI CEI EN ISO / IEC 17065/2012 and UNI CEI EN ISO / IEC 17020/2012 (certification of product conformity), and certified DIN PLUS in compliance with PAS 1075 technical standard.

MAIN FEATURES

Detection of obligation to repair damage
When deeper than the colored external wall
Reduction / elimination of maintenance
Lower network management costs
Higher service efficiency
Less problems for final users
Longer life-span
Pipes completely compliant to the various standards
Correspondent to all types of connections
Suitable for no-dig
More resistant to chemical agents
Advantageous cost/benefit rapport
Savings

Plug&Play – coupler/socket for PE pressure pipes

BRIEF DESCRIPTION

Push-to-connect double coupler made of polypropylene (PP) for PE pipes up to PN16, provided with double lip sealing gaskets and special anti-slipping rings. Elbow and tee shapes are available too. The diameters range (DN) goes from 20 up to 250 mm (OD pipes), but is also possible to request reduced sizes. The range for PE100 PN16 pipes from ɸ 20 to 63 mm requires the adoption of a “pipe liner” inside the end of the pipe to be connected. The socket version is made of PE from DN 90 up to 250 mm (PN 16-10), then butt-welded on one end of the pipe in the factory before the shipment (on-site welding is possible too).

MAIN FEATURES

High tightness reliability
Easy and fast to install
Wide range of diameters
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High shock absorption capacity
Recyclable