Plumbing Pipes Archivi - System Group

Pex-al-pex multilayer pipes for gas

Admin-2@tubiNet2021-07-28T14:27:41+02:00

Pex-al-pex multilayer pipes for gas

BRIEF DESCRIPTION

Multilayer pipes made of cross-linked polyethylene with a smooth yellow outer surface, a smooth white inner one (both made of PEX-b) and a middle layer which consists of aluminium foil with an oxygen barrier function combined with the PE layers (inner and outer) through specific adhesives. The diameters range (OD) goes from 16 to 32 mm. Pipes are delivered in coils and bars, with or without the yellow coating of corrugated pipe. They find application in the gas distribution for domestic appliances.

MAIN FEATURES & BENEFITS

PEX-b: cross-linked polyethylene with the addition of silanes
Oxygen and UV rays barrier effect (thanks to the aluminium)
High corrosion resistance
Electrochemically inert
Long service life
Quieter than the usual metal pipes
Low thermal expansion
Narrow-radius curve flexibility
Wide range of press fittings

Pex-al-pex multilayer pipes for hot water

Admin-2@tubiNet2021-07-22T12:53:13+02:00

Pex-al-pex multilayer pipes for hot water

BRIEF DESCRIPTION

Multilayer pipes made of cross-linked polyethylene, with smooth white inner and outer surfaces made of PEX-b and a middle layer which consists of an aluminium foil with an oxygen barrier function combined with the PE layers (inner and outer) through specific adhesives. The diameters range (OD) goes from 14 up to 63 mm. Pipes can be delivered in coils and bars, with or without heat-insulated coating sheath available in blue, red or white colour. They find application in the distribution of water up to 95°C.

MAIN FEATURES & BENEFITS

PEX-b: cross-linked polyethylene with the addition of silanes
For PN10 service with liquids with temperatures up to 95°C
Suitable for the distribution of potable water
Oxygen and UV rays barrier effect (thanks to the aluminium)
High corrosion resistance
Electrochemically inert
Long service life
Quieter than the usual metal pipes
Low thermal expansion
Possibility of thermal insulation with specific outer sheath
Narrow-radius curve flexibility
Wide range of press fittings

PE 80 pipe for pressurized water networks

Admin-2@tubiNet2021-07-22T11:09:46+02:00

PE 80 pipe for pressurized water networks

BRIEF DESCRIPTION

Solid wall pipes made of PE 80 (MRS 8 MPa – σ_S 6,3 MPa) with a smooth inner and outer surface, available in black colour (with or without external coextruded coloured stripes) or completely blue. Diameters (OD) go from 20 up to 1200 mm. Pipes can be delivered in coils and bars.

MAIN FEATURES

100% permanent water tightness
Good bending properties, particularly appreciated in manual applications in colder climate
Low modulus of elasticity
Plastic behavior in unstable circumstances
Wide range of diameters and pressure classes (sizing optimization)
Wide range of fittings and special pieces, standard and customized
Related to aqueducts, this pipe is in conformity with the EN 1622 standard about “determination of threshold of smell and taste”
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption capacity
Recyclable

Solid wall PE 100 pipes for pressurized water networks

Admin-2@tubiNet2024-07-02T09:26:18+02:00

Solid wall PE 100 pipes for pressurized water networks

BRIEF DESCRIPTION

Solid wall pipes made of PE 100 (MRS 10 MPa – σ_S 8 MPa) with a smooth inner and outer surface, available in black colour (with or without external coextruded coloured stripes) or completely blue.
Diameters (OD) go from 20 up to 1200 mm. Pipes can be delivered in coils or bars.

MAIN FEATURES

100% permanent and watertight seal
Pliability
Wide range of dimension and performance choice
Very high chemical, electrical and biological resistance
High abrasion resistance
Low elasticity modulus
Plastic behavior in unstable situations
Reduced number of joints
System Homogeneity
Lightness
More resistant to chemical agents compared to other materials
Security
Savings
Recyclable

CERTIFICATES:

Admin-2@tubiNet2024-07-02T09:26:52+02:00

EuroPas Evolution – Solid wall PE 100 RC pipes (Resistant to Crack) type 1

BRIEF DESCRIPTION

Black high density polyethylene (HDPE) PE100 RC pipes (type1), with co-extruded blue stripes, for the transport of pressure water, for human consumption too, with product quality mark in compliance with (UNI) EN 12201-2 standard issued by an accredited independent organization according to UNI CEI EN ISO / IEC 17065/2012 and UNI CEI EN ISO / IEC 17020/2012 (certification of product conformity), and certified DIN PLUS in compliance with PAS 1075 technical standard.

MAIN FEATURES

Designed for trenchless tech. Installations
Higher service efficiency
More resistant to chemical agents
Compared to other materials
Longer life-span
Reduction / elimination of maintenance
Lower network management costs
Less disruption to users
Pipes completely compliant to the official standards
Correspondent to all types of connections
Advantageous cost/benefit ratio
Savings

CERTIFICATES:

CENTRALTUBI

DIN CERTCO pas 1075 type 1 acqua up to 75

DIN CERTCO pas 1075 type 1 acqua 75 to 225

DIN CERTCO pas 1075 type 1 acqua 250 to 630

DIN CERTCO pas 1075 type 1 acqua 710

BureauVeritas PE100 UNI EN 12201 ACQUA

PiiP/C Europas Evolution Type 1

NF gruppo 2 acqua potabile in pressione

IIP UNI EN 12201-2 2013 UNI EN 1622 2006

NORDIC POLY MARK

DK VAND

DVGW UP TO 63

DVGW FROM DE 75 TO DE 225

SVGW

DERIPLAST

NF GR2 12201

EUROPAS SAFE10 Solid wall PE 100 RC pipes (Resistant to Crack) type 2

Admin-2@tubiNet2024-07-02T09:27:15+02:00

EUROPAS SAFE10 Solid wall PE100 RC pipes (Resistant to Crack) type 2

BRIEF DESCRIPTION

High density polyethylene (HDPE) PE100 RC pipes, made with black inner layer (90%) and with blue outer layer (10%) – type 2, for the transport of pressure water, for human consumption too, with product quality mark in compliance with (UNI) EN 12201-2 standard issued by an accredited independent organization according to UNI CEI EN ISO / IEC 17065/2012 and UNI CEI EN ISO / IEC 17020/2012 (certification of product conformity), and certified DIN PLUS in compliance with PAS 1075 technical standard.

MAIN FEATURES

Detection of obligation to repair damage
When deeper than the colored external wall
Reduction / elimination of maintenance
Lower network management costs
Higher service efficiency
Less problems for final users
Longer life-span
Pipes completely compliant to the various standards
Correspondent to all types of connections
Suitable for no-dig
More resistant to chemical agents
Advantageous cost/benefit rapport
Savings

CERTIFICATES:

CENTRALTUBI

BureauVeritas PE100 UNI EN 12201 ACQUA

DIN CERTCO pas 1075 type 2/1 acqua 75 to 225

DIN CERTCO pas 1075 type 2/2 acqua 250 to 630

DIN CERTCO pas 1075 type 2/2 acqua 710

PiiP/C Europas Evolution Type 2

IIP UNI EN 12201-2 2013 UNI EN 1622 2006

SVGW

PE100 FLEX – PE100 PIPES WITH LOW APPLIED EFFORT FOR BENDING

Gallery

PE100 FLEX – PE100 PIPES WITH LOW APPLIED EFFORT FOR BENDING

Admin-2@tubiNet2024-07-02T09:29:15+02:00

PE100 FLEX – PE100 PIPES WITH LOW APPLIED EFFORT FOR BENDING.

BRIEF DESCRIPTION

Solid wall pipes made of high density polyethylene, PE 100 (MRS 10 MPa – σ_S 8,0 MPa) with inner and outer smooth surface, available in black colour (with or without coextruded coloured stripe on the outer surface) with low applied effort for bending. The diameters range (OD) goes from 20 up to 1200 mm and pipes are delivered in coils and bars. They find application in pressurized and non-pressurized water systems.

MAIN FEATURES

100% permanent watertightness
Good flexibility
Reduction of the applied effort for bending compared to the one of the PE100 standard
Plastic behaviour in unstable situations
Wide range of diameters and pressure classes (sizing optimisation)
Wide range of fittings and special pieces, both standard and customised
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption ability
Recyclable

Cattura

CERTIFICATES:

CENTRALTUBI

Certificato BureauVeritas PE100 UNI EN 12201 ACQUA

Plumbing Pipes

Pex-al-pex multilayer pipes for gas

BRIEF DESCRIPTION

MAIN FEATURES & BENEFITS

Pex-al-pex multilayer pipes for hot water

BRIEF DESCRIPTION

MAIN FEATURES & BENEFITS

PE 80 pipe for pressurized water networks

BRIEF DESCRIPTION

MAIN FEATURES

Solid wall PE 100 pipes for pressurized water networks

BRIEF DESCRIPTION

MAIN FEATURES

CERTIFICATES:

CENTRALTUBI

LUCANIA RESINE

DERIPLAST

EuroPas Evolution – Solid wall PE 100 RC pipes (Resistant to Crack) type 1

BRIEF DESCRIPTION

MAIN FEATURES

CERTIFICATES:

CENTRALTUBI

DERIPLAST

EUROPAS SAFE10 Solid wall PE100 RC pipes (Resistant to Crack) type 2

BRIEF DESCRIPTION

MAIN FEATURES

CERTIFICATES:

CENTRALTUBI

PE100 FLEX – PE100 PIPES WITH LOW APPLIED EFFORT FOR BENDING.

BRIEF DESCRIPTION

MAIN FEATURES

CERTIFICATES:

CENTRALTUBI

Contact Us