Rainwater Recovery System

Lift station

Lift station

2021-07-23T10:43:25+02:00

Lift station

BRIEF DESCRIPTION

Linear low-density polyethylene (LLDPE) storage tank of various sizes, with a submerged electric pump installed inside it. Sewage lift stations are systems that allow effluent to be lifted and transferred to stations located at higher levels (sewerage systems, treatment systems). Depending on the customer’s need, the lift stations can be equipped with various types of pumps with different heads, flow rates and working pressures.

MAIN CHARACTERISTICS

lightness
access manhole for maintenance and inspection; optional extension
easy, fast, safe and very economical to install
made of 100% virgin and atoxic material
suitable to support significant changes in temperature (- 20 up to + 80°C)
High resistance to corrosion and oxidation
inert to stray currents
not subject to deterioration over time
100% recyclable

YOU-TUBE

Submersed Electric Pump For Sewage Backup

Submersed Electric Pump For Sewage Backup

2021-05-24T13:06:08+02:00

SUBMERSED ELECTRIC PUMP FOR SEWAGE BACKUP

Material:
tie-rods, handle, nuts and bolts, motor casing and shaft in stainless steel; cover, pump body and impeller in mechanic cast iron; mechanical seal in graphite and ceramic; asynchronous motor with short-circuit rotor in coolant bath mounted on ball bearings.

Application:
submersed electric pump with set-back or double-channel impeller for pumping of waste water, sewage backup and septic tanks; drainage of rainwater; pumping of liquids containing solids and filaments (with set-back impeller).

Use and maintenance:
under normal operating conditions, the electric pump does not  require  any  maintenance  operations.  In case of permanent installation, an annual inspection is recommended in which the liquid inlet is cleaned (and the metal filter, if any) of mud and debris and the wear conditions of the impeller are checked as well as the status of electric cable, handle and fastener.

Pompe acque nere con misure-ok

Submersed Pump For Clear Waters

Submersed Pump For Clear Waters

2021-05-24T13:06:10+02:00

SUBMERSED PUMP FOR CLEAR WATER

Material:
outer casing, handle, nuts and bolts, motor casing and shaft in stainless steel; pipe union, motor and central body cover in brass; impellers and diffusers in noryl® reinforced in fibreglass, certified for potable water; mechanical seal in graphite and ceramic with lubrication chamber; asynchronous motor with short-circuit rotor mounted on ball bearings.

Application:
submersed electric pump for pumping water from stormwater tanks and wells.

Use and maintenance:
under normal operating conditions, the electric pump does not require any maintenance operations. It is advisable to periodically check the current absorption and delivery pressure of the pump. A current absorption higher than the nominal value can be caused by abnormal mechanical friction in the motor or pump. A reduction in delivery pressure can be caused by wear in the hydraulic  components of the pump.

pompa-sommerca-tecnico

Irrigation stations modular

Irrigation stations modular

2021-07-22T14:51:06+02:00

Irrigation stations modular

BRIEF DESCRIPTION

Modular Underground tanks made of linear low density polyethylene (LLDPE), tank and system for the storage and re-use of rainwater, for underground installation, fitted with a PVC inlet stilling pipe and overflow pipe, PP outlet pipe and connectors, submersible electric pump, polyethylene (PE) delivery pipe, clapet type check valve, pump lift chain and electronic control pressure switch.

These systems allow rainwater to be harvested for the so-called “less noble” uses, i.e.: watering gardens,        washing outside areas and cars, filling toilet cisterns (only mod. HABITA)

 MAIN CHARACTERISTICS

lightness
access manhole for maintenance and inspection; optional extension
easy, fast, safe and very economical to install
made of 100% virgin and non-toxic material
suitable to support significant changes in temperature (- 20 up to + 80°C)
High resistance to corrosion and oxidation
inert to stray currents
not subject to deterioration over time
100% recyclable

YOU-TUBE

Irrigation stations

Irrigation stations

2021-07-22T14:51:45+02:00

Irrigation stations

BRIEF DESCRIPTION

One-piece polyethylene (PE) tank and system for the storage and re-use of rainwater, for underground installation, fitted with a PVC inlet stilling pipe and overflow pipe, PE outlet pipe and connectors, submersible electric pump, polyethylene (PE) delivery pipe, clapet type check valve, pump lift chain and electronic control pressure switch.

These systems allow rainwater to be harvested for the so-called “less noble” uses, i.e.: watering gardens,        washing outside areas and cars, filling toilet cisterns (only mod. HABITA)

MAIN CHARACTERISTICS

lightness
access manhole for maintenance and inspection; optional extension
easy, fast, safe and very economical to install
made of 100% virgin and non-toxic material
suitable to support significant changes in temperature (- 20 up to + 80°C)
High resistance to corrosion and oxidation
inert to stray currents
not subject to deterioration over time
100% recyclable

YOU-TUBE

Contact Us

    Privacy Policy

    * 1) I declare I read the Privacy policy of this website.
      2) We would like to use your personal data in order to keep you update through e-mails, instant messages, chats or phone calls on news and commercial offers concerning our products and services and the third parties ones, and also concerning other marketing activities mentioned in the C letter. Please note that you can always change your decision and refuse the processing of your personal data for marketing purposes by contacting us through the e-mail address privacy.systemgroup@tubi.net .
      3) We would like to share your personal data with the other companies that belong to “System Group” and the partners in order to be processed for commercial and marketing purposes.

    logo
    Headquarter:
    Centraltubi Via Foglia 11, Lunano, 61026 (PU) Italy
    Società soggetta a direzione e coordinamento da parte di HB Boscarini S.p.A
    Phone: +39 0722 70011
    Fax: +39 0722 70402
    Email address: info@tubi.net
    WhatsApp chat
    Go to Top