Second Life Plastic PSV Pipe

HDPE solid wall pipes for underground cable protection

BRIEF DESCRIPTION

High density polyethylene (HDPE) pipes with a solid wall profile, internally and externally smooth, black with/without red coextruded stripes on the external surface, connectable by buttfusion welding (verified according to ISO 13953) in order to be suitable also for the execution of trenchless installations (HDD, Pipe Bursting …)

In order to ensure the normal operation of the system with cable temperatures up to 80ºC and short-circuit temperatures (not exceeding 5 seconds) up to 160ºC, the mechanical characteristics of the pipe meet the requirements of the following standards:

• CEI EN 61386–1–24 (from ɸ 25 up to ɸ 250 mm)
• IEC 62067: Verification of the mechanical characteristics of HDPE conduits for cable with nominal voltages from 150 to 500 kV, before and after thermal aging
• ENA TS 12-24: verification of crushing strain resistance at 50ºC (Group 2) and 75ºC (Group 1)

Range of diameters included:

• all those required by CEI EN 61386, in various thicknesses for the different classes of ring stiffness
• all sizes up to ɸ 1200 mm, with reference to the SDR classes standardized by EN 12201-2

MAIN FEATURES & BENEFITS

IMQ quality mark certified according to 61386-1-24 standard (size range from ɸ 25 up to ɸ 250 mm)
CE marking*
On request: PSV mark (Plastica Seconda Vita – Second Life Plastic) – Circular Economy model
100% permanent watertight seal
Pliability (according to tab.1 below)
plastic behaviour in unstable situations
wide range of fittings and special parts, standard and customized
inertia to stray currents
high chemical resistance (ISO/TR 10358– ISO/TR 7474)
high shock absorption capacity
totally recyclable
CONNECTIONS between the elements

1. compression fittings up to DN 110 mm
2. push-fast fittings “Plug&Play” from DN 16 up to 250 mm
3. butt-fusion welding (NO for trenchless installation techniques)
4. electro-fusion welding
5. PE injection molded couplers “NRG” (IP 66-68) for DN 160 + 200 + 225 + 250 mm

* for the diameter range included in standard 61386

PVC solid wall pipes for cable protection

BRIEF DESCRIPTION

Solid wall pipes made of polyvinyl chloride (PVC-U), available in grey colour (RAL 7021). The diameters range (OD) goes from 50 up to 250 mm. Standard pipes are delivered in 6m lengths with a built-in socket provided with a gasket. Glue connection available on demand. They are used for the construction of underground networks for cables threading.

For Circular Economy goals, pipes can be partially made (on demand) with recycled material, guaranteed by PSV mark (Plastica Seconda Vita – Second Life Plastic).

MAIN FEATURES

Ring stiffness: 450 – 750 N
Impact resistance class: L – N
CEI EN 61386 standard (with IMQ quality mark)
Standard socket connections with sealing lip-gasket made of EPDM (EN 681)
Glue socket connections
High chemical and abrasion resistance
Inert to stray currents
It can be provided with PIPE TRACER, the 3D (altimetric map) tracking system for underground pipelines.

PVC pipes threaded and micro-slotted for drainage

PVC pipes, made by System Group PVC, have the double function of collecting excess water in the soil and conveying it in a drain line,in order to ensure the safety of environments in the vicinity of natural or artificial slopes. It has been proven for years, that the use of a product with the slots adequately adjusted to the ground particle size, guarantees a long draining effectiveness over time. The sub-horizontal drainage pipes can also be used for road drains, agricultural, railway, airport, construction and public green.

IDROWELL – PVC solid wall pipes for boreholes

BRIEF DESCRIPTION

Solid wall pipes made of polyvinyl chloride (PVC) with smooth inner and outer surface, available in light blue colour (RAL 5012). The diameters range goes from (OD) 125 up to 500 mm, and pipes are delivered in bars of 3-5 m length, with glue socket connection system or with threaded male and female. This product is also available in these two versions:

• Slotted pipe for water collection
• With coating of pre-installed sock filter made of non-woven fabric

Pipes are used for coating boreholes for water extraction

MAIN FEATURES

PVC is stabilised with lead-free products (Pb)
Suitable for contact with water for human consumptions (D.M. n. 174 of April 6^th 2004)
Glue socket connections
Connections made through threaded ends tightening
High chemical resistance
Inert to stray currents

SG-PVC Sewer – PVC solid wall pipes for sewerage networks

BRIEF DESCRIPTION

Solid wall pipes made of polyvinyl chloride (U/D-PVC), available in brick-red colour (RAL 8023). The diameters range (OD) goes from 110 up to 500 mm. Standard pipes are delivered in 3 or 6m lengths with a built-in socket provided with a gasket. Glue connection available on demand. They are used for the construction of non-pressurized waste systems, outside the buildings (code: “U”), buried inside the building (code: “D”).

For Circular Economy goals, pipes can be partially made (on demand) with recycled material, guaranteed by PSV mark (Plastica Seconda Vita – Second Life Plastic).

MAIN FEATURES

Ring stiffness: SN 2 – 4 – 8
“ICE” certification (impact resistance test at -10°C for installation in cold climates) with marking☸
Standard socket connections with sealing lip-gasket made of EPDM (EN 681)

On demand:
– Socket connections with DINLOCK gasket type (with hard insert made of PP). Cold insertion (EN 681)
– Socket connections with POWERLOCK gasket type (with hard insert made of PP). Warm insertion (EN 681)
– Glue socket connections

PSV mark (Plastica Seconda Vita – Second Life Plastic) on demand)
High chemical and abrasion resistance
Inert to stray currents
It can be provided with PIPE TRACER , the 3D (altimetric map) tracking system for underground pipelines.
Wide range of standard moulded fittings

HDPE solid wall pipes for non-pressure networks

BRIEF DESCRIPTION

Solid wall pipes made of high density polyethylene (HDPE) with a smooth inner and outer surface, available in black colour (with or without external coextruded coloured stripes). The diameters range (OD) go from 20 up to 1200 mm and pipes are delivered in bars.

MAIN FEATURES

100% permanent water tightness
Long-range bending
Low modulus of elasticity
Plastic behaviour in unstable situations
Wide range of fittings and special pieces, standard and customized
Inert to stray currents
High abrasion and chemical resistance (ISO/TR 10358)
High shock absorption capacity
Recyclable

BLACKCOR – HDPE double wall corrugated pipe for cable protection

BRIEF DESCRIPTION

Double wall corrugated pipes made of high-density polyethylene (HDPE), smooth on the inside wall and corrugated outside, for underground cable protection networks.
Diameters (DN/OD) go from 40 up to 200 mm, all available in coils, and in lengths from DN75 mm size.

Standard colour is totally black, to increase the UV resistance. It can be equipped with one coextruded coloured stripe on the outside wall, according to customers’ need.

MAIN FEATURES

Wide range of diameters
Ring stiffness: 450 – 750 N
Impact test classification: N
Close bending radius
Coupling connections
Accessories: Coupling sleeve + polypropylene/polyester wire puller.
High UV resistance
Lightweight and easy to install
Standard bands color: white/light grey, customized color available on demand.
High chemical resistance
Inert to stray currents
Recyclable

TECHNICAL CHARACTERISTICS

UV resistance according to EN1297 test, up to 5000h (one year warranty)
Crush resistance: 450N – Standard EN 61386-1/2008 and EN 61386-24/2010 series N (IIP and IMQ certified)
Bending radius: 15 times the outer diameter.
Operating limits: -50 °C / +60 °C.
Electrical rigidity*: Excellent (polyethylene 20-30 kV/mm)

*Electrical rigidity, also known as dielectric strength or breakdown voltage, represents the ability of a material to withstand a certain electric voltage before a discharge or breakdown occurs. High electrical rigidity is desirable in materials intended for electrical insulation, such as those used in cables, transformers, capacitors, and other electrical and electronic components.

Electrical rigidity is primarily classified based on the breakdown voltage, which depends on the material and its thickness.

CENTRALDRENI HDPE solid wall slotted pipes for drainage

BRIEF DESCRIPTION

Solid wall pipes made of high density polyethylene (HDPE) with a smooth inner and outer surface, available in black colour. They are provided with transverse slots of different sizes and layout and are used for the construction of underground drainage systems for liquids, landfill leachate and biogas collection. The diameters (OD) range goes from 75 up to 400 mm and pipes are delivered in bars. Upon request, they can be certified PSV (Plastica Seconda Vita – Second Life Plastic) when are made with HDPE obtained from separate waste collection to guarantee that the products can be traced back so being part of circular economy model.

MAIN FEATURES

Wide range of slots layout
Long-range bending
Plastic behaviour in unstable situations
Wide range of fittings and special pieces, standard and customized
Inert to stray currents
High abrasion and chemical resistance (ISO/TR 10358)
High shock absorption capacity
Recyclable