No dig

Solid wall PE 100 pipes for pressurized networks

BRIEF DESCRIPTION

Solid wall pipes made of PE 100 (MRS 10 MPa – σ_S 8 MPa) with a smooth inner and outer surface, available in black colour (with or without external coextruded coloured stripes) or completely blue.
Diameters (OD) go from 20 up to 1200 mm. Pipes can be delivered in coils or bars.

MAIN FEATURES

100% permanent water tightness;
Good bending properties
Plastic behavior in unstable circumstances;
Wide range of diameters and pressure classes (sizing optimization);
Wide range of fittings and special pieces,  standard and customized
Related to aqueducts, this pipe is in conformity with the EN 1622 standard about “determination of threshold of smell and taste”
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorbing capacity
Recyclable

DCR – Solid wall PE 100 DCR pipes for chlorinated water networks

BRIEF DESCRIPTION

Solid wall pipes made of PE 100 DCR (MRS 10 MPa – σ_S 8 MPa) with an inner and outer smooth surface, available in black colour (with or without external coextruded coloured stripes). The diameters range (OD) goes from 20 up to 1200 mm and pipes can be delivered in coils and bars. They are highly resistant to chlorine disinfectants used in water for human consumption.

MAIN FEATURES & BENEFITS

High resistance to chlorine aging effects DCR (Dioxide Chlorine Resistant)
100% permanent water tightness
Good bending properties
Plastic behaviour in unstable situations
Wide range of diameters and pressure classes (sizing optimization)
Wide range of fittings and special pieces, standard and customized
Related to aqueducts, this pipe is in conformity with the EN 1622 standard about “determination of threshold of smell and taste”
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption capacity
Recyclable

PE100 RC type 1 Pipe for gas “Europas Evolution”

BRIEF DESCRIPTION

Solid wall pipes made of PE 100 RC (MRS 10 MPa) with high resistance to Slow Crack Growth (SCG), smooth on the inside and the outside. Type 1 (1 layer) is available in black colour (with external orange coextruded stripes) or completely orange.
Diameters (OD) go from 20 up to 800 mm. Pipes can be delivered in coils or bars and they are used for the construction of GAS distribution systems.

MAIN FEATURES

High resistance to SCG from point loads and surface incisions
Particularly recommended for NO DIG installation techniques
100% permanent water tightness
Good bending properties
Plastic behaviour in unstable situations
Wide range of diameters (sizing optimization)
Wide range of standard fittings
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption capacity
Recyclable

EuroPas Evolution – Solid wall PE 100 RC pipes (Resistant to Crack) type 1

BRIEF DESCRIPTION

Solid wall pipes made of PE 100 RC (MRS 10 MPa – σ_S 8,0 MPa) with smooth inner and outer surface and high resistance to Slow Crack Growth (SCG).
Type 1 (1 layer) is  available in black colour (with or without coextruded external coloured stripes) or completely blue. Diameters (OD) go from 20 to 1200 mm. Pipes can be provided in coils or bars.

MAIN FEATURES

High resistance to SCG point loads and surface incisions
Particularly recommended for NO DIG installation techniques
100% permanent water tightness
Good bending properties
Plastic behavior in unstable circumstances
Wide range of diameters and pressure classes (sizing optimization)
Wide range of fittings and special pieces standard and customized
Related to aqueducts, this pipe is in conformity with the EN 1622 standard “determination of threshold of smell and taste”
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorbing capacity
Recyclable

PE100 – RC type 2 pipe for gas”Europas Safe10″

BRIEF DESCRIPTION

Solid wall pipes made of PE 100 RC (MRS 10 MPa) with high resistance to Slow Crack Growth (SCG), smooth on the inside and the outside. Type 2 (2 layers) is available with inner black colour wall (90% of the thickness) + outer orange colour wall (10% of the thickness).
Diameters (OD) go from 20 up to 450 mm. Pipes are delivered in coils or bars and are used for the construction of GAS distribution systems.

MAIN FEATURES

High resistance to SCG from point loads and surface incisions
Particularly recommended for NO DIG installation techniques
100% permanent water tightness
Good bending properties
Plastic behaviour in unstable situations
Wide range of diameters (sizing optimization)
Wide range of standard fittings
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption capacity
It is recyclable

PE100 – RC type 2 pipe for water “Europas Safe10”

BRIEF DESCRIPTION

Solid wall pipes made of PE 100 RC (MRS 10 MPa – σ_S 6,3 MPa) with a smooth inner and outer surface and with high resistance to Slow Crack Growth (SCG).
Type 2 (2 layers) is available with inner black colour wall (90% of the thickness) + outer blue colour wall (10% of the thickness).
Diameters (OD) go from 20 up to 450 mm. Pipes can be provided in coils or bars.

MAIN FEATURES

High resistance to SCG from point loads and surface incisions
Particularly recommended for NO DIG installation techniques
Good bending properties
100% permanent water tightness
Helpful for the detection of external incisions greater than 10%
Plastic behavior in unstable circumstances
Wide range of diameters and pressure classes (sizing optimization)
Wide range of fittings and special pieces , standard and customized
Related to aqueducts, this pipe is in conformity with the EN 1622 standard “determination of threshold of smell and taste”
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorbing capacity
Recyclable