Plumbing

Blueseal16 – Polypropylene compression fittings

2024-10-09T09:33:02+02:00

COMPRESSION FITTING BLUESEAL…

Compression fittings made of polypropylene (PP) for connecting polyethylene (PE) pipes that find application in drinking water pipelines PN16. Fittings are provided with lip seal and anti-slipping crimping rings and the diameters range (DN) goes from 16 to 110 mm. The complete range of compression fittings consists of more than 300 items, including couplings, elbows, Tee pieces (90° C), caps and reductions. Among the various types there are also PE-copper transition fittings, PE-metal universal fittings,  fittings with threaded inserts made of brass and finally, fittings with Viton gasket and PBT crimping ring for usage in presence of acids. When the water pipeline is subjected to pressure, the patented tightness system allows to push the gasket against the pipe wall thanks to the “slide-effect” which increase the tightness level. Blueseal is also available with the O-ring gasket and in blue or black colour.

MAIN FEATURES

High water tightness reliability
Ease and quick installation
Better tightness
Wide range of fittings
High shock absorption ability
Recyclable

YOU-TUBE

Repair clamps

2021-07-22T13:22:07+02:00

Repair clamps

BRIEF DESCRIPTION

Repair clamps for failures on pipes with flat outer surface, either plastic, stone or metal. They consist of fixing elements of cast iron with clamping screws and bolts of galvanised steel, and a stainless steel band with a NBR rubber surface on the inside for winding the pipe where the failure is located. Diameters range from DN 16 up to DN 750 mm. Clamps  are used for temporary repairs on pipes that are used for water or gas distribution with or without pressure. Upon request, it is possible to take into consideration the production of models for customised diameters.

MAIN FEATURES

Application flexibility
Easy and quick to use
Reliability
Wide range of sizes and performances

YOU-TUBE

Underground Tanks

2021-05-24T13:07:04+02:00

UNDERGROUND TANKS

Application:
tanks for storage of potable water, rainwater or other liquids for human consumption. Thanks to the high resistance and low reactivity of linear high density polyethylene, the underground tanks can be used for the storage of large volumes of liquids (see Compatibility of PE with other fluids).

Use and maintenance:
the underground tanks are not subject to deterioration over time. The materials used assure utmost reliability against oxidation or corrosion. Their mono-block structure guarantees robusticity and strength as they are free of welds that could weaken those parts subjected to internal stresses. Tanks can be bored when the need arises. The smoothness of their surface results in an easy maintenance and their lightness in simple transport and installation. Furthermore, their cost is much lower than that of other materials such as metal, cement and fibreglass.

Modularity:
Thanks to the installation of PE flanged joints, different tanks can be connected to provide higher storage volumes.

Available colours:
black and grey.

Installation: underground installation instructions provided by ROTOTEC.

WARNINGS:
The underground tanks must not, under any circumstances, be installed above ground; prior to installation, carefully check the integrity of the tanks and tightness of the gaskets; do not install the tanks near to sources of heat; the tanks must be positioned on a flat stable surface; when installing the tanks make sure that no light can filter in so as to prevent the formation of algae; use flexible hoses when connecting to the water system in order to prevent stresses during tank filling and emptying; do not leave the tank without its cover for any length of time; in case of rainwater storage, it is advisable to install a leaf filter chamber upstream of the tank to prevent a build-up of grit, silt, leaves, etc inside the tank; for storing fluids not expressly indicated in this catalogue (see page 68), please contact the technical office.

Pex-al-pex multilayer pipes for gas systems

2024-07-30T16:21:23+02:00

Pex-al-pex multilayer pipes for gas systems

BRIEF DESCRIPTION

Multilayer pipes made of cross-linked polyethylene with a smooth yellow outer surface, a smooth white inner one (both made of PEX-b) and a middle layer which consists of aluminium foil with an oxygen barrier function combined with the PE layers (inner and outer) through specific adhesives.

The diameters range (OD) goes from 16 to 32 mm. Pipes are delivered in coils and pipe lengths, with or without the yellow coating of corrugated pipe. They find application in the gas distribution for domestic appliances.

MAIN FEATURES & BENEFITS

PEX-b: cross-linked polyethylene with the addition of silanes
Oxygen and UV rays barrier effect (thanks to the aluminium)
High corrosion resistance
Electrochemically inert
Long service life
Quieter than the usual metal pipes
Low thermal expansion
Narrow-radius curve flexibility
Wide range of press fittings

YOU-TUBE

CERTIFICATES:

SA.MI Plastic

PIIP

Pex-al-pex multilayer pipes for water

2024-07-30T16:30:26+02:00

Pex-al-pex multilayer pipes for water

BRIEF DESCRIPTION

Multilayer pipes made of cross-linked polyethylene, with smooth white inner and outer surfaces made of PEX-b and a middle layer which consists of an aluminium foil with an oxygen barrier function combined with the PE layers (inner and outer) through specific adhesives. The diameters range (OD) goes from 14 up to 63 mm. Pipes can be delivered in coils and bars, with or without heat-insulated coating sheath available in blue, red or white colour. They find application in the distribution of water up to 95°C.

MAIN FEATURES & BENEFITS

PEX-b: cross-linked polyethylene with the addition of silanes
For PN10 service with liquids with temperatures up to 95°C (Tmal 110°)
Suitable for the distribution of potable water
Oxygen and UV rays barrier effect (thanks to the aluminium)
High corrosion resistance
Electrochemically inert
Long service life
Quieter than the usual metal pipes
Low thermal expansion
Possibility of thermal insulation with specific outer sheath
Narrow-radius curve flexibility
Wide range of press fittings

YOU-TUBE

CERTIFICATES:

PE 80 pipe for pressurized water networks

2021-07-22T11:09:46+02:00

PE 80 pipe for pressurized water networks

BRIEF DESCRIPTION

Solid wall pipes made of PE 80 (MRS 8 MPa – σS 6,3 MPa) with a smooth inner and outer surface, available in black colour (with or without external coextruded coloured stripes) or completely blue. Diameters (OD) go from 20 up to 1200 mm. Pipes can be delivered in coils and bars.

MAIN FEATURES

100% permanent water tightness
Good bending properties, particularly appreciated in manual applications in colder climate
Low modulus of elasticity
Plastic behavior in unstable circumstances
Wide range of diameters and pressure classes (sizing optimization)
Wide range of fittings and special pieces, standard and customized
Related to aqueducts, this pipe is in conformity with the EN 1622 standard about “determination of threshold of smell and taste”
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption capacity
Recyclable

YOU-TUBE

Solid wall PE 100 pipes for pressurized water networks

2024-07-02T09:26:18+02:00

Solid wall PE 100 pipes for pressurized water networks

BRIEF DESCRIPTION

Solid wall pipes made of PE 100 (MRS 10 MPa – σS 8 MPa) with a smooth inner and outer surface, available in black colour (with or without external coextruded coloured stripes) or completely blue.
Diameters (OD) go from 20 up to 1200 mm. Pipes can be delivered in coils or bars.

MAIN FEATURES

100% permanent and watertight seal
Pliability
Wide range of dimension and performance choice
Very high chemical, electrical and biological resistance
High abrasion resistance
Low elasticity modulus
Plastic behavior in unstable situations
Reduced number of joints
System Homogeneity
Lightness
More resistant to chemical agents compared to other materials
Security
Savings
Recyclable

YOU-TUBE

DCR – Solid wall PE 100 DCR pipes for chlorinated water networks

2024-07-02T09:27:59+02:00

DCR – Solid wall PE 100 DCR pipes for chlorinated water networks

BRIEF DESCRIPTION

Solid wall pipes made of PE 100 DCR (MRS 10 MPa – σS 8 MPa) with an inner and outer smooth surface, available in black colour (with or without external coextruded coloured stripes). The diameters range (OD) goes from 20 up to 1200 mm and pipes can be delivered in coils and bars. They are highly resistant to chlorine disinfectants used in water for human consumption.

MAIN FEATURES & BENEFITS

High resistance to chlorine aging effects DCR (Dioxide Chlorine Resistant)
100% permanent water tightness
Good bending properties
Plastic behaviour in unstable situations
Wide range of diameters and pressure classes (sizing optimization)
Wide range of fittings and special pieces, standard and customized
Related to aqueducts, this pipe is in conformity with the EN 1622 standard about “determination of threshold of smell and taste”
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption capacity
Recyclable

YOU-TUBE

CERTIFICATES:

EuroPas Evolution Solid wall PE 100 RC pipes (Resistant to Crack) type 1

2024-07-02T09:26:52+02:00

EuroPas Evolution – Solid wall PE 100 RC pipes (Resistant to Crack) type 1

BRIEF DESCRIPTION

Black high density polyethylene (HDPE) PE100 RC pipes (type1), with co-extruded blue stripes, for the transport of pressure water, for human consumption too, with product quality mark in compliance with (UNI) EN 12201-2 standard issued by an accredited independent organization according to UNI CEI EN ISO / IEC 17065/2012 and UNI CEI EN ISO / IEC 17020/2012 (certification of product conformity), and certified DIN PLUS in compliance with PAS 1075 technical standard.

MAIN FEATURES

Designed for trenchless tech. Installations
Higher service efficiency
More resistant to chemical agents
Compared to other materials
Longer life-span
Reduction / elimination of maintenance
Lower network management costs
Less disruption to users
Pipes completely compliant to the official standards
Correspondent to all types of connections
Advantageous cost/benefit ratio
Savings

YOU-TUBE

EUROPAS SAFE10 Solid wall PE 100 RC pipes (Resistant to Crack) type 2

2024-07-02T09:27:15+02:00

EUROPAS SAFE10 Solid wall PE100 RC pipes (Resistant to Crack) type 2

BRIEF DESCRIPTION

High density polyethylene (HDPE) PE100 RC pipes, made with black inner layer (90%) and with blue outer layer (10%) – type 2, for the transport of pressure water, for human consumption too, with product quality mark in compliance with (UNI) EN 12201-2 standard issued by an accredited independent organization according to UNI CEI EN ISO / IEC 17065/2012 and UNI CEI EN ISO / IEC 17020/2012 (certification of product conformity), and certified DIN PLUS in compliance with PAS 1075 technical standard.

MAIN FEATURES

Detection of obligation to repair damage
When deeper than the colored external wall
Reduction / elimination of maintenance
Lower network management costs
Higher service efficiency
Less problems for final users
Longer life-span
Pipes completely compliant to the various standards
Correspondent to all types of connections
Suitable for no-dig
More resistant to chemical agents
Advantageous cost/benefit rapport
Savings

YOU-TUBE

PE100 FLEX – PE100 PIPES WITH LOW APPLIED EFFORT FOR BENDING

2024-07-02T09:29:15+02:00

PE100 FLEX – PE100 PIPES WITH LOW APPLIED EFFORT FOR BENDING.

BRIEF DESCRIPTION

Solid wall pipes made of high density polyethylene, PE 100 (MRS 10 MPa – σS 8,0 MPa) with inner and outer smooth surface, available in black colour (with or without coextruded coloured stripe on the outer surface) with low applied effort for bending. The diameters range (OD) goes from 20 up to 1200 mm and pipes are delivered in coils and bars. They find application in pressurized and non-pressurized water systems.

MAIN FEATURES

100% permanent watertightness
Good flexibility
Reduction of the applied effort for bending compared to the one of the PE100 standard
Plastic behaviour in unstable situations
Wide range of diameters and pressure classes (sizing optimisation)
Wide range of fittings and special pieces, both standard and customised
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption ability
Recyclable

Cattura

YOU-TUBE

Blueseal16 – Polypropylene compression fittings

2023-01-25T08:58:02+01:00

COMPRESSION FITTING BLUESEAL

Compression fittings made of polypropylene (PP) for connecting polyethylene (PE) pipes that find application in drinking water pipelines PN16. Fittings are provided with lip seal and anti-slipping crimping rings and the diameters range (DN) goes from 16 to 110 mm. The complete range of compression fittings consists of more than 300 items, including couplings, elbows, Tee pieces (90° C), caps and reductions. Among the various types there are also PE-copper transition fittings, PE-metal universal fittings,  fittings with threaded inserts made of brass and finally, fittings with Viton gasket and PBT crimping ring for usage in presence of acids. When the water pipeline is subjected to pressure, the patented tightness system allows to push the gasket against the pipe wall thanks to the “slide-effect” which increase the tightness level. Blueseal is also available with the O-ring gasket and in blue or black colour.

MAIN FEATURES

High water tightness reliability
Ease and quick installation
Better tightness
Wide range of fittings
High shock absorption ability
Recyclable

YOU-TUBE

Contact Us

    Privacy Policy

    * 1) I declare I read the Privacy policy of this website.
      2) We would like to use your personal data in order to keep you update through e-mails, instant messages, chats or phone calls on news and commercial offers concerning our products and services and the third parties ones, and also concerning other marketing activities mentioned in the C letter. Please note that you can always change your decision and refuse the processing of your personal data for marketing purposes by contacting us through the e-mail address privacy.systemgroup@tubi.net .
      3) We would like to share your personal data with the other companies that belong to “System Group” and the partners in order to be processed for commercial and marketing purposes.

    Go to Top