Water Pipes

PE 100 DCR+RC Pipe

2024-07-02T09:28:20+02:00

PE 100 DCR PIPE

SPECIFICATION ITEM

Pipe in PE – RD (Resistant to Chlorine Dioxide).

TECHNICAL SPECIFICATION

High density polyethylene pipes entirely made of PE100 resin (MRS ≥ 10 MPa) with high resistance to chlorine components (Clo2) dissolved in water, fully complying with the standard EN 12201. The marking shall report in full the code of the raw material used for the production of the pipe, as well as other elements required by the reference standards.

 

 

Thus EUROPE DCR emerges, and provides additional value to the pipe while increasing its longevity also, against the degrading effects of chlorine. Expectations of durability of operation of these pipes stretch significantly, increasing the value and management efficiency of the networks.

DEVELOPMENT OF THE PRODUCT

The term RD (Resistant to Chlorine Dioxide) refers to PE100 pipes with higher durability against the degrading activity of chlorine (Clo2) and other chlorine agents, the latter one being increasingly used for the sanitation of drinking water.

 

FEATURES AND ADVANTAGES

  • High tensile strength
  • High resistance to chlorine aging effect
  • Higher durability for the transport of drinking water
  • Economies: lower costs for maintenance and repair

Geolocation and referencing system for underground networks – Pipe Tracer

2024-07-04T08:49:23+02:00

Geolocation and referencing system for underground networks – Pipe Tracer

GENERAL DESCRIPTION

High-precision geolocation system + referencing of underground network infrastructures, to be positioned on the outer upper generatrix of the pipes during installation. The system is composed of:

  • A small steel cable completely coated with polyethylene to be isolated and protected from the aggressiveness of the surrounding environment (soil pH, stray currents, water)
  • Straight and TEE connectors for watertight connections between the cables
  • Plastic connection boxes for the introduction of the electromagnetic signal, equipped with two stainless steel fins to allow grounding
  • Connection jack to the connection box for the introduction of the electromagnetic signal
  • Small cast iron terminal manholes to house the individual connection boxes when placed on pedestrian or vehicular pathways
  • “WBH”* plastic frames, fixable to cement, plastic walls (manholes, valves and water meter boxes), or poles, for positioning and securing the connection boxes and grounding connection
  • RFID (Radio Frequency Identification) tags – on request – for recording and reading of referencing information of individual network sections, placed inside the cast iron terminal manholes or on the WBH frame

The installed system remains passive throughout its lifetime but can be activated at any time by introducing an electromagnetic signal from any connection box via a specific generator (external portable). This condition makes the cable continuous sly traceable by appropriate instruments (available on the market in various brands and types) with a high degree of precision, obtaining 3D GPS coordinates. The RFID tags are writable and readable with specific instruments or simple smartphones equipped with NFC technology.

* WBHWall Box Holder

MAIN FEATURES

High degree of 3D localization accuracy
Creation of precise underground maps
Enhanced safety for construction workers
Reduced intervention times when necessary
Deterrent against negligent installation (exact detection of position and depth of buried pipes)
Durability (chemical and electrical inertia)
Suitable for any type of material, shape, and size of buried pipes
Electromagnetic signal suitable for any type of service (water, gas, energy, telephony, optical fibers, etc.)
Ease and speed of installation
Specialized watertight fittings
Referencing system for individual sections of pipelines

Components

The Pipe Tracer geolocation system brings significant operational advantages to utilities, impacting moderately on the extra cost for project execution borne by the contractor. It represents an optimal trade-off between costs and benefits.

In this regard, companies SOLIMENO, BICICCHI, and CERAGIOLI have won important tenders in the TUSCANY REGION by proposing this innovative system for georeferencing underground pipelines to contracting authorities (GAIA and NUOVE ACQUE). Network managers also need to carry out fast and cost-effective interventions while minimizing disruption to the populations in affected areas (excavations on roads and/or sidewalks), thereby avoiding damage to other underground infrastructures and service interruptions.

With Pipe Tracer, there is effectively a perfectly traceable infrastructure mapped in terms of both plan and altitude (3D coordinates), with a high degree of precision, regardless of the type, diameter, and material of the pipes to be traced. This ensures the operators to avoid any damages to the existing buried networks.

References

TUSCANY REGION

[dicembre 4th, 2019|Products FocusReferences]

IDROWELL – PVC solid wall pipes for boreholes

2024-07-01T15:06:33+02:00

IDROWELL – PVC solid wall pipes for boreholes

BRIEF DESCRIPTION

Solid wall pipes made of polyvinyl chloride (PVC) with smooth inner and outer surface, available in light blue colour (RAL 5012). The diameters range goes from (OD) 125 up to 500 mm, and pipes are delivered in bars of 3-5 m length, with glue socket connection system or with threaded male and female. This product is also available in these two versions:

  • Slotted pipe for water collection
  • With coating of pre-installed sock filter made of non-woven fabric

Pipes are used for coating boreholes for water extraction

MAIN FEATURES

PVC is stabilised with lead-free products (Pb)
Suitable for contact with water for human consumptions (D.M. n. 174 of April 6th 2004)
Glue socket connections
Connections made through threaded ends tightening
High chemical resistance
Inert to stray currents

YOU-TUBE

PVC solid wall pipes for pressure networks

2021-06-14T10:56:55+02:00

PVC solid wall pipes for pressure networks

BRIEF DESCRIPTION

Solid wall pipes made of polyvinyl chloride (PVC) with a smooth inner and outer surface, available in grey colour (RAL 7021). The diameters range (OD) goes from 50 up to 500 mm. Pipes are delivered in bars of 6 m with a built-in socket for glue connection or provided with a gasket. They are used for the construction of pressurized piping systems (irrigation – water system – plant engineering).

 MAIN FEATURES

PVC is stabilised with lead-free products (Pb)
Suitable for contact with water for human consumptions (D.M. n. 174 of April 6th 2004)
Pressure classes: PN 6 – 10 – 12,5 – 16 – 20
Socket connections with lip seal made of EPDM (EN 681)
Socket connections with ANGERLOCK gasket type (with hard insert made of PP). Cold insertion (EN 681)
Socket connections with POWERLOCK gasket type (with hard insert made of PP). Warm insertion (EN 681)
Glue socket connections
Wide range of standard moulded fittings
High chemical and abrasion resistance
Inert to stray currents
It can be provided with PIPE TRACER, the plano-altimetric tracking system for underground pipelines

YOU-TUBE

PE 80 pipe for pressurized water networks

2021-07-22T11:09:46+02:00

PE 80 pipe for pressurized water networks

BRIEF DESCRIPTION

Solid wall pipes made of PE 80 (MRS 8 MPa – σS 6,3 MPa) with a smooth inner and outer surface, available in black colour (with or without external coextruded coloured stripes) or completely blue. Diameters (OD) go from 20 up to 1200 mm. Pipes can be delivered in coils and bars.

MAIN FEATURES

100% permanent water tightness
Good bending properties, particularly appreciated in manual applications in colder climate
Low modulus of elasticity
Plastic behavior in unstable circumstances
Wide range of diameters and pressure classes (sizing optimization)
Wide range of fittings and special pieces, standard and customized
Related to aqueducts, this pipe is in conformity with the EN 1622 standard about “determination of threshold of smell and taste”
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption capacity
Recyclable

YOU-TUBE

Solid wall PE 100 pipes for pressurized water networks

2024-07-02T09:26:18+02:00

Solid wall PE 100 pipes for pressurized water networks

BRIEF DESCRIPTION

Solid wall pipes made of PE 100 (MRS 10 MPa – σS 8 MPa) with a smooth inner and outer surface, available in black colour (with or without external coextruded coloured stripes) or completely blue.
Diameters (OD) go from 20 up to 1200 mm. Pipes can be delivered in coils or bars.

MAIN FEATURES

100% permanent and watertight seal
Pliability
Wide range of dimension and performance choice
Very high chemical, electrical and biological resistance
High abrasion resistance
Low elasticity modulus
Plastic behavior in unstable situations
Reduced number of joints
System Homogeneity
Lightness
More resistant to chemical agents compared to other materials
Security
Savings
Recyclable

YOU-TUBE

DCR – Solid wall PE 100 DCR pipes for chlorinated water networks

2024-07-02T09:27:59+02:00

DCR – Solid wall PE 100 DCR pipes for chlorinated water networks

BRIEF DESCRIPTION

Solid wall pipes made of PE 100 DCR (MRS 10 MPa – σS 8 MPa) with an inner and outer smooth surface, available in black colour (with or without external coextruded coloured stripes). The diameters range (OD) goes from 20 up to 1200 mm and pipes can be delivered in coils and bars. They are highly resistant to chlorine disinfectants used in water for human consumption.

MAIN FEATURES & BENEFITS

High resistance to chlorine aging effects DCR (Dioxide Chlorine Resistant)
100% permanent water tightness
Good bending properties
Plastic behaviour in unstable situations
Wide range of diameters and pressure classes (sizing optimization)
Wide range of fittings and special pieces, standard and customized
Related to aqueducts, this pipe is in conformity with the EN 1622 standard about “determination of threshold of smell and taste”
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption capacity
Recyclable

YOU-TUBE

CERTIFICATES:

EuroPas Evolution Solid wall PE 100 RC pipes (Resistant to Crack) type 1

2024-07-02T09:26:52+02:00

EuroPas Evolution – Solid wall PE 100 RC pipes (Resistant to Crack) type 1

BRIEF DESCRIPTION

Black high density polyethylene (HDPE) PE100 RC pipes (type1), with co-extruded blue stripes, for the transport of pressure water, for human consumption too, with product quality mark in compliance with (UNI) EN 12201-2 standard issued by an accredited independent organization according to UNI CEI EN ISO / IEC 17065/2012 and UNI CEI EN ISO / IEC 17020/2012 (certification of product conformity), and certified DIN PLUS in compliance with PAS 1075 technical standard.

MAIN FEATURES

Designed for trenchless tech. Installations
Higher service efficiency
More resistant to chemical agents
Compared to other materials
Longer life-span
Reduction / elimination of maintenance
Lower network management costs
Less disruption to users
Pipes completely compliant to the official standards
Correspondent to all types of connections
Advantageous cost/benefit ratio
Savings

YOU-TUBE

EUROPAS SAFE10 Solid wall PE 100 RC pipes (Resistant to Crack) type 2

2024-07-02T09:27:15+02:00

EUROPAS SAFE10 Solid wall PE100 RC pipes (Resistant to Crack) type 2

BRIEF DESCRIPTION

High density polyethylene (HDPE) PE100 RC pipes, made with black inner layer (90%) and with blue outer layer (10%) – type 2, for the transport of pressure water, for human consumption too, with product quality mark in compliance with (UNI) EN 12201-2 standard issued by an accredited independent organization according to UNI CEI EN ISO / IEC 17065/2012 and UNI CEI EN ISO / IEC 17020/2012 (certification of product conformity), and certified DIN PLUS in compliance with PAS 1075 technical standard.

MAIN FEATURES

Detection of obligation to repair damage
When deeper than the colored external wall
Reduction / elimination of maintenance
Lower network management costs
Higher service efficiency
Less problems for final users
Longer life-span
Pipes completely compliant to the various standards
Correspondent to all types of connections
Suitable for no-dig
More resistant to chemical agents
Advantageous cost/benefit rapport
Savings

YOU-TUBE

Plug&Play – coupler/socket for PE pressure pipes

2024-07-02T09:28:46+02:00

Plug&Play – coupler/socket for PE pressure pipes

BRIEF DESCRIPTION

Push-to-connect double coupler made of polypropylene (PP) for PE pipes up to PN16, provided with double lip sealing gaskets and special anti-slipping rings. Elbow and tee shapes are available too. The diameters range (DN) goes from 20 up to 250 mm (OD pipes), but is also possible to request reduced sizes. The range for PE100 PN16 pipes from ɸ 20 to 63 mm requires the adoption of a “pipe liner” inside the end of the pipe to be connected. The socket version is made of PE from DN 90 up to 250 mm (PN 16-10), then butt-welded on one end of the pipe in the factory before the shipment (on-site welding is possible too).

MAIN FEATURES

High tightness reliability
Easy and fast to install
Wide range of diameters
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High shock absorption capacity
Recyclable

 

YOU-TUBE

PE100 FLEX – PE100 PIPES WITH LOW APPLIED EFFORT FOR BENDING

2024-07-02T09:29:15+02:00

PE100 FLEX – PE100 PIPES WITH LOW APPLIED EFFORT FOR BENDING.

BRIEF DESCRIPTION

Solid wall pipes made of high density polyethylene, PE 100 (MRS 10 MPa – σS 8,0 MPa) with inner and outer smooth surface, available in black colour (with or without coextruded coloured stripe on the outer surface) with low applied effort for bending. The diameters range (OD) goes from 20 up to 1200 mm and pipes are delivered in coils and bars. They find application in pressurized and non-pressurized water systems.

MAIN FEATURES

100% permanent watertightness
Good flexibility
Reduction of the applied effort for bending compared to the one of the PE100 standard
Plastic behaviour in unstable situations
Wide range of diameters and pressure classes (sizing optimisation)
Wide range of fittings and special pieces, both standard and customised
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption ability
Recyclable

Cattura

YOU-TUBE

Contact Us

    Privacy Policy

    * 1) I declare I read the Privacy policy of this website.
      2) We would like to use your personal data in order to keep you update through e-mails, instant messages, chats or phone calls on news and commercial offers concerning our products and services and the third parties ones, and also concerning other marketing activities mentioned in the C letter. Please note that you can always change your decision and refuse the processing of your personal data for marketing purposes by contacting us through the e-mail address privacy.systemgroup@tubi.net .
      3) We would like to share your personal data with the other companies that belong to “System Group” and the partners in order to be processed for commercial and marketing purposes.

    Go to Top