Irrigation

Injected moulded fittings for solid wall HDPE pipes

2024-10-09T16:09:45+02:00

Injected moulded fittings for solid wall HDPE pipes

BRIEF DESCRIPTION

Injected HDPE moulded pieces for high density polyethylene pipes, with a smooth inner surface. The pieces are available in black colour and they can be connected trough butt-welding, with electrofusion fittings or mechanical fittings. SDR 17-11-7,4 range. They are used for the construction of systems for the fluids transport up to 25 bar pressure.

MAIN FEATURES

Wide range of shapes and diameters
Reliability
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption capacity
Recyclable

YOU-TUBE

Electrofusion fittings Sabfuse

2024-10-09T15:59:31+02:00

Electrofusion fittings Sabfuse

BRIEF DESCRIPTION

PE100 Electrofusion fittings for connecting elements of polyethylene pipes (coils, bars, folders with flanges, special pieces) with pressurized and non-pressurized pipelines for the distribution of gas and water (for human consumption too). The electrofusion fittings have an inner metallic thread that, thanks to the passage of electricity, generates the heat requested for the fusion of the polyethylene in the inner surface of the fitting and the outer surface of the pipe, thus allowing the welding between the two elements. This operation takes place through welding machines, powered by specific generators connected to the fitting through cables inside the specific pins. There are also the “fusion witnesses” which are useful for the visual inspection of the properly fusion. The installation instructions can be read automatically by the device trough the barcode reported on every single fitting. Wide range of shapes (sleeves, bends, derivations, TEE pieces etc..) and diameters to work at nominal pressures of 6, 10, 16 and 25 bars.

MAIN FEATURES

Complete system
High tightness reliability
Fusion on the outer surface of the pipe (the inner welding seam is not created)
Suitable for pressurized and non-pressurized systems, up to 25 bar

Blueseal16 – Polypropylene compression fittings

2024-10-09T09:33:02+02:00

COMPRESSION FITTING BLUESEAL…

Compression fittings made of polypropylene (PP) for connecting polyethylene (PE) pipes that find application in drinking water pipelines PN16. Fittings are provided with lip seal and anti-slipping crimping rings and the diameters range (DN) goes from 16 to 110 mm. The complete range of compression fittings consists of more than 300 items, including couplings, elbows, Tee pieces (90° C), caps and reductions. Among the various types there are also PE-copper transition fittings, PE-metal universal fittings,  fittings with threaded inserts made of brass and finally, fittings with Viton gasket and PBT crimping ring for usage in presence of acids. When the water pipeline is subjected to pressure, the patented tightness system allows to push the gasket against the pipe wall thanks to the “slide-effect” which increase the tightness level. Blueseal is also available with the O-ring gasket and in blue or black colour.

MAIN FEATURES

High water tightness reliability
Ease and quick installation
Better tightness
Wide range of fittings
High shock absorption ability
Recyclable

YOU-TUBE

Lift station

2021-07-23T10:43:25+02:00

Lift station

BRIEF DESCRIPTION

Linear low-density polyethylene (LLDPE) storage tank of various sizes, with a submerged electric pump installed inside it. Sewage lift stations are systems that allow effluent to be lifted and transferred to stations located at higher levels (sewerage systems, treatment systems). Depending on the customer’s need, the lift stations can be equipped with various types of pumps with different heads, flow rates and working pressures.

MAIN CHARACTERISTICS

lightness
access manhole for maintenance and inspection; optional extension
easy, fast, safe and very economical to install
made of 100% virgin and atoxic material
suitable to support significant changes in temperature (- 20 up to + 80°C)
High resistance to corrosion and oxidation
inert to stray currents
not subject to deterioration over time
100% recyclable

YOU-TUBE

RioFlex – Polyethylene LayFlat Hose

2023-04-12T15:47:53+02:00

RioFlex – Polyethylene LayFlat Hose

BRIEF DESCRIPTION

Distribution pipe for drip irrigation systems. Rioflex is an handy solution, resistant and entirely recyclable, in order to facilitate the laying and storage operations after the season. These benefits are possible thanks to the polyethylene features that makes up for 100% this layflat, including the reinforcing net. Rioflex is particularly lighter than the classic PVC layflats and can be provided with built-in derivations or they can be installed on the site through the specific kit which consists of pliers, insert and locking wrench.

Rioflex is available in four different versions in order to satisfy the needs of the majority of drip irrigation systems or sprinkling irrigation systems with hoses and driplines or irrigation through sprinkler and mini sprinkler:

  • High Pressure (max 6 bar)
  • Pressure (max 4 bar)
  • Low Pressure (max 2,5 bar)
  • Free Flow (max 0,5 bar)

Pipe has a low inner roughness in order to reduce the pressure drop and has a low reaction to thermal shocks. The pack includes the usage and maintenance instructions and, once the product reaches the end of its useful life, Rioflex can be recycled along with the polyethylene hoses.

MAIN FEATURES

Easy and quick to install
Lightweight
Low inner roughness
100% recyclable

YOU-TUBE

Submersed Pump For Clear Waters

2021-05-24T13:06:10+02:00

SUBMERSED PUMP FOR CLEAR WATER

Material:
outer casing, handle, nuts and bolts, motor casing and shaft in stainless steel; pipe union, motor and central body cover in brass; impellers and diffusers in noryl® reinforced in fibreglass, certified for potable water; mechanical seal in graphite and ceramic with lubrication chamber; asynchronous motor with short-circuit rotor mounted on ball bearings.

Application:
submersed electric pump for pumping water from stormwater tanks and wells.

Use and maintenance:
under normal operating conditions, the electric pump does not require any maintenance operations. It is advisable to periodically check the current absorption and delivery pressure of the pump. A current absorption higher than the nominal value can be caused by abnormal mechanical friction in the motor or pump. A reduction in delivery pressure can be caused by wear in the hydraulic  components of the pump.

pompa-sommerca-tecnico

Valve Boxes For Irrigation

2021-07-22T13:31:53+02:00

VALVE BOXES FOR IRRIGATION

BRIEF DESCRIPTION

Polyethylene valve boxes for irrigation systems, great for residential or landscaped applications. They are sturdy, lightweight and stackable, and have been developed in order to facilitate the laying operations and to make easier the installation processes. The holes for the pipes passage can be made by using a simple utility knife. The cover, which is available in green colour and with the typical anti-slip texture, is secured with common self-tapping screws made of stainless steel which can be removed by using a simple screwdriver. The cover has a provision for being drilled in order to install a lighting column which is located inside the box thanks to the specific pole-carrier accessory.

MAIN FEATURES

Toughness
Lightweight
Stackable
Easy and quick to install
UV resistance
Provision for pipes and lighting columns

YOU-TUBE

Repair clamps

2021-07-22T13:22:07+02:00

Repair clamps

BRIEF DESCRIPTION

Repair clamps for failures on pipes with flat outer surface, either plastic, stone or metal. They consist of fixing elements of cast iron with clamping screws and bolts of galvanised steel, and a stainless steel band with a NBR rubber surface on the inside for winding the pipe where the failure is located. Diameters range from DN 16 up to DN 750 mm. Clamps  are used for temporary repairs on pipes that are used for water or gas distribution with or without pressure. Upon request, it is possible to take into consideration the production of models for customised diameters.

MAIN FEATURES

Application flexibility
Easy and quick to use
Reliability
Wide range of sizes and performances

YOU-TUBE

Injected moulded fittings for solid wall HDPE pipes

2022-06-20T18:11:05+02:00

Injected moulded fittings for solid wall HDPE pipes

BRIEF DESCRIPTION

Injected HDPE moulded pieces for high density polyethylene pipes, with a smooth inner surface. The pieces are available in black colour and they can be connected trough butt-welding, with electrofusion fittings or mechanical fittings. SDR 17-11-7,4 range. They are used for the construction of systems for the fluids transport up to 25 bar pressure.

MAIN FEATURES

Wide range of shapes and diameters
Reliability
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption capacity
Recyclable

YOU-TUBE

Electrofusion fittings Sabfuse

2022-08-10T10:53:13+02:00

Electrofusion fittings Sabfuse

BRIEF DESCRIPTION

PE100 Electrofusion fittings for connecting elements of polyethylene pipes (coils, bars, folders with flanges, special pieces) with pressurized and non-pressurized pipelines for the distribution of gas and water (for human consumption too). The electrofusion fittings have an inner metallic thread that, thanks to the passage of electricity, generates the heat requested for the fusion of the polyethylene in the inner surface of the fitting and the outer surface of the pipe, thus allowing the welding between the two elements. This operation takes place through welding machines, powered by specific generators connected to the fitting through cables inside the specific pins. There are also the “fusion witnesses” which are useful for the visual inspection of the properly fusion. The installation instructions can be read automatically by the device trough the barcode reported on every single fitting. Wide range of shapes (sleeves, bends, derivations, TEE pieces etc..) and diameters to work at nominal pressures of 6, 10, 16 and 25 bars.

MAIN FEATURES

Complete system
High tightness reliability
Fusion on the outer surface of the pipe (the inner welding seam is not created)
Suitable for pressurized and non-pressurized systems, up to 25 bar

Drippers

2021-07-22T13:01:34+02:00

DRIPPERS

PRESSURE COMPENSANTING AND NON-PRESSURE COMPENSANTING DRIPPER

Drippers allow the focused-watering of shrubs and plants which are grown in greenhouse. Our range consists of: Rambo drippers, normal and with compensation pressure; Sting drippers that can’t be inspected and self-compensating; Minidelta drippers and adjustable sprayers. These items, once placed inside capillary tubes with a Ø 3,5mm or directly inside the LDPE line of Ø 16mm, allow a precise plant wetting with the right amount of water. Drippers can work up to 3 bar pressure and guarantee a carrying capacity from 2 l/h up to 16 l/h for the Rambo drippers and up to 22 l/h for the Minidelta type.

MAIN FEATURES

Compensation pressure
Drippers can be inspected

YOU-TUBE

Segmented fittings for solid wall HDPE pipes

2022-06-17T10:29:43+02:00

Segmented fittings for solid wall HDPE pipes

BRIEF DESCRIPTION

Fittings and special pieces consisting of sectors of high density polyethylene pipes with solid and smooth wall. They are available in black colour (with or without external coextruded coloured bands), in 2 layers (black on the inside and coloured on the outside) or coloured on the inside. The diameters range goes from 20 up to 1200 mm and of every kind of SDR.

MAIN FEATURES

Good drainage capacity
Pre-installed external filter sock
Cost-effective installation
Lightweight
Wide range of diameters
Inert to stray currents
High chemical resistance (ISO /TR 10358)
High abrasion resistance
High shock absorption resistance
Recyclable

YOU-TUBE

CERTIFICATES:

IDROWELL – PVC solid wall pipes for boreholes

2024-07-01T15:06:33+02:00

IDROWELL – PVC solid wall pipes for boreholes

BRIEF DESCRIPTION

Solid wall pipes made of polyvinyl chloride (PVC) with smooth inner and outer surface, available in light blue colour (RAL 5012). The diameters range goes from (OD) 125 up to 500 mm, and pipes are delivered in bars of 3-5 m length, with glue socket connection system or with threaded male and female. This product is also available in these two versions:

  • Slotted pipe for water collection
  • With coating of pre-installed sock filter made of non-woven fabric

Pipes are used for coating boreholes for water extraction

MAIN FEATURES

PVC is stabilised with lead-free products (Pb)
Suitable for contact with water for human consumptions (D.M. n. 174 of April 6th 2004)
Glue socket connections
Connections made through threaded ends tightening
High chemical resistance
Inert to stray currents

YOU-TUBE

SGPVC Pressure – PVC solid wall pipes for water pressure networks

2024-08-26T14:02:46+02:00

SGPVC Pressure – PVC solid wall pipes for water pressure networks

BRIEF DESCRIPTION

Solid wall pipes made of polyvinyl chloride (PVC-U), available in grey colour (RAL 7021). The diameters range (OD) goes from 50 up to 500 mm. Standard pipes are delivered in 6m lengths with a built-in socket provided with a gasket. Glue connection available on demand. They are used for the construction of pressurized piping systems (irrigation – water system – plant engineering and other industrial applications).

 MAIN FEATURES

PVC is stabilized with lead-free products (Pb)
Suitable for contact with water for human consumptions
Pressure classes: PN 6 – 10 – 12,5 – 16 – 20
Standard socket connections with lip-gasket sealing made of EPDM (EN 681)
On demand:

– Socket connections with ANGERLOCK gasket type (with hard insert made of PP). Cold insertion (EN 681)
– Socket connections with POWERLOCK gasket type (with hard insert made of PP). Warm insertion (EN 681)

Glue socket connections
Wide range of standard moulded fittings
High chemical and abrasion resistance
Inert to stray currents
It can be provided with PIPE TRACER , the 3D (altimetric map) tracking system for underground pipelines.

YOU-TUBE

MAGO – SKY – SABTAPE – drip tape for irrigation

2021-07-22T13:53:49+02:00

MAGO – SKY – SABTAPE – drip tape for irrigation

BRIEF DESCRIPTION

Continuous labyrinth drip tape for drip irrigation of horticultural and extensive crops with a maximum thickness of 15 mils (0.381 mm). These performing and efficient solutions allow to save water and increase the crops yield. Thanks to the large section labyrinth, which ensures a water turbulent flow and an high resistance to occlusions, they guarantee an uniform water and fertilizers distribution to the crops, with the best wing lengths available on the market. Our drip tape are manufactured with spacing of 10, 20, 30, and 40 cm, with a range of capacities that goes from 0,6 up to 2,0 l/h and a maximum thickness of 15 mil. There are 3 versions:

  1. MaGo – high performances drip tape. It consists of an individual coextruded pipe and ensures high performances with the best wing lengths available on the market.
  2. Sky – high quality drip tape produced through extrusion and subsequent walls gluing. It is more competitive than other drip tapes thanks to its thin thicknesses, especially in its tight spacing.
  3. Sabtape – high quality drip tape produced through extrusion and subsequent walls gluing with the outer coextruded coloured stripe. It is the highly competitive solution thanks to its thin thicknesses, especially in its tight spacing.

MAIN FEATURES

Excellent uniformity of distribution
High resistance to occlusions
High water saving

YOU-TUBE

Irrigation stations modular

2021-07-22T14:51:06+02:00

Irrigation stations modular

BRIEF DESCRIPTION

Modular Underground tanks made of linear low density polyethylene (LLDPE), tank and system for the storage and re-use of rainwater, for underground installation, fitted with a PVC inlet stilling pipe and overflow pipe, PP outlet pipe and connectors, submersible electric pump, polyethylene (PE) delivery pipe, clapet type check valve, pump lift chain and electronic control pressure switch.

These systems allow rainwater to be harvested for the so-called “less noble” uses, i.e.: watering gardens,        washing outside areas and cars, filling toilet cisterns (only mod. HABITA)

 MAIN CHARACTERISTICS

lightness
access manhole for maintenance and inspection; optional extension
easy, fast, safe and very economical to install
made of 100% virgin and non-toxic material
suitable to support significant changes in temperature (- 20 up to + 80°C)
High resistance to corrosion and oxidation
inert to stray currents
not subject to deterioration over time
100% recyclable

YOU-TUBE

Irrigation stations

2021-07-22T14:51:45+02:00

Irrigation stations

BRIEF DESCRIPTION

One-piece polyethylene (PE) tank and system for the storage and re-use of rainwater, for underground installation, fitted with a PVC inlet stilling pipe and overflow pipe, PE outlet pipe and connectors, submersible electric pump, polyethylene (PE) delivery pipe, clapet type check valve, pump lift chain and electronic control pressure switch.

These systems allow rainwater to be harvested for the so-called “less noble” uses, i.e.: watering gardens,        washing outside areas and cars, filling toilet cisterns (only mod. HABITA)

MAIN CHARACTERISTICS

lightness
access manhole for maintenance and inspection; optional extension
easy, fast, safe and very economical to install
made of 100% virgin and non-toxic material
suitable to support significant changes in temperature (- 20 up to + 80°C)
High resistance to corrosion and oxidation
inert to stray currents
not subject to deterioration over time
100% recyclable

YOU-TUBE

Drip line

2021-06-07T11:34:10+02:00

DRIPLINE

BRIEF DESCRIPTION

Pipes made of polyethylene PE for drip irrigation, available in brown colour, with an OD of 16 mm and delivered in coils of 100 m. They are particularly recommended  for the irrigation of flowerbeds and decorative hedges, as well as for shrub, vineyards,  olive groves and fruit trees.

MAIN FEATURES

Easy to install
Reduced friction loss
Double version: standard and self-compensating
Excellent water distribution

ALA GOGGIOLANTE

YOU-TUBE

TUBONE – smooth HD or MD PE pipes for self-propelled irrigation machines

2021-06-07T11:33:55+02:00

TUBONE – smooth HD or MD PE pipes for self-propelled irrigation machines

BRIEF DESCRIPTION

Medium or high density polyethylene pipes, with inner and outer smooth surface, available in black colour. The diameters range (OD) goes from 40 up to 160 mm. Pipes are delivered in coils with various lengths depending on the client’s request. They are used for equip self-moving irrigating machines.

MAIN FEATURES

Good bending property
High abrasion resistance
Pipes can bear multiple windings and unwindings
Wide range of diameters and pressure classes (sizing optimization)
High chemical resistance (ISO/TR 10358)
High shock absorption ability
Recyclable

YOU-TUBE

PE 80 pipe for pressurized water networks

2021-07-22T11:09:46+02:00

PE 80 pipe for pressurized water networks

BRIEF DESCRIPTION

Solid wall pipes made of PE 80 (MRS 8 MPa – σS 6,3 MPa) with a smooth inner and outer surface, available in black colour (with or without external coextruded coloured stripes) or completely blue. Diameters (OD) go from 20 up to 1200 mm. Pipes can be delivered in coils and bars.

MAIN FEATURES

100% permanent water tightness
Good bending properties, particularly appreciated in manual applications in colder climate
Low modulus of elasticity
Plastic behavior in unstable circumstances
Wide range of diameters and pressure classes (sizing optimization)
Wide range of fittings and special pieces, standard and customized
Related to aqueducts, this pipe is in conformity with the EN 1622 standard about “determination of threshold of smell and taste”
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption capacity
Recyclable

YOU-TUBE

Solid wall PE 100 pipes for pressurized water networks

2024-07-02T09:26:18+02:00

Solid wall PE 100 pipes for pressurized water networks

BRIEF DESCRIPTION

Solid wall pipes made of PE 100 (MRS 10 MPa – σS 8 MPa) with a smooth inner and outer surface, available in black colour (with or without external coextruded coloured stripes) or completely blue.
Diameters (OD) go from 20 up to 1200 mm. Pipes can be delivered in coils or bars.

MAIN FEATURES

100% permanent and watertight seal
Pliability
Wide range of dimension and performance choice
Very high chemical, electrical and biological resistance
High abrasion resistance
Low elasticity modulus
Plastic behavior in unstable situations
Reduced number of joints
System Homogeneity
Lightness
More resistant to chemical agents compared to other materials
Security
Savings
Recyclable

YOU-TUBE

EuroPas Evolution Solid wall PE 100 RC pipes (Resistant to Crack) type 1

2024-07-02T09:26:52+02:00

EuroPas Evolution – Solid wall PE 100 RC pipes (Resistant to Crack) type 1

BRIEF DESCRIPTION

Black high density polyethylene (HDPE) PE100 RC pipes (type1), with co-extruded blue stripes, for the transport of pressure water, for human consumption too, with product quality mark in compliance with (UNI) EN 12201-2 standard issued by an accredited independent organization according to UNI CEI EN ISO / IEC 17065/2012 and UNI CEI EN ISO / IEC 17020/2012 (certification of product conformity), and certified DIN PLUS in compliance with PAS 1075 technical standard.

MAIN FEATURES

Designed for trenchless tech. Installations
Higher service efficiency
More resistant to chemical agents
Compared to other materials
Longer life-span
Reduction / elimination of maintenance
Lower network management costs
Less disruption to users
Pipes completely compliant to the official standards
Correspondent to all types of connections
Advantageous cost/benefit ratio
Savings

YOU-TUBE

EUROPAS SAFE10 Solid wall PE 100 RC pipes (Resistant to Crack) type 2

2024-07-02T09:27:15+02:00

EUROPAS SAFE10 Solid wall PE100 RC pipes (Resistant to Crack) type 2

BRIEF DESCRIPTION

High density polyethylene (HDPE) PE100 RC pipes, made with black inner layer (90%) and with blue outer layer (10%) – type 2, for the transport of pressure water, for human consumption too, with product quality mark in compliance with (UNI) EN 12201-2 standard issued by an accredited independent organization according to UNI CEI EN ISO / IEC 17065/2012 and UNI CEI EN ISO / IEC 17020/2012 (certification of product conformity), and certified DIN PLUS in compliance with PAS 1075 technical standard.

MAIN FEATURES

Detection of obligation to repair damage
When deeper than the colored external wall
Reduction / elimination of maintenance
Lower network management costs
Higher service efficiency
Less problems for final users
Longer life-span
Pipes completely compliant to the various standards
Correspondent to all types of connections
Suitable for no-dig
More resistant to chemical agents
Advantageous cost/benefit rapport
Savings

YOU-TUBE

Plug&Play – coupler/socket for PE pressure pipes

2024-07-02T09:28:46+02:00

Plug&Play – coupler/socket for PE pressure pipes

BRIEF DESCRIPTION

Push-to-connect double coupler made of polypropylene (PP) for PE pipes up to PN16, provided with double lip sealing gaskets and special anti-slipping rings. Elbow and tee shapes are available too. The diameters range (DN) goes from 20 up to 250 mm (OD pipes), but is also possible to request reduced sizes. The range for PE100 PN16 pipes from ɸ 20 to 63 mm requires the adoption of a “pipe liner” inside the end of the pipe to be connected. The socket version is made of PE from DN 90 up to 250 mm (PN 16-10), then butt-welded on one end of the pipe in the factory before the shipment (on-site welding is possible too).

MAIN FEATURES

High tightness reliability
Easy and fast to install
Wide range of diameters
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High shock absorption capacity
Recyclable

 

YOU-TUBE

PE100 FLEX – PE100 PIPES WITH LOW APPLIED EFFORT FOR BENDING

2024-07-02T09:29:15+02:00

PE100 FLEX – PE100 PIPES WITH LOW APPLIED EFFORT FOR BENDING.

BRIEF DESCRIPTION

Solid wall pipes made of high density polyethylene, PE 100 (MRS 10 MPa – σS 8,0 MPa) with inner and outer smooth surface, available in black colour (with or without coextruded coloured stripe on the outer surface) with low applied effort for bending. The diameters range (OD) goes from 20 up to 1200 mm and pipes are delivered in coils and bars. They find application in pressurized and non-pressurized water systems.

MAIN FEATURES

100% permanent watertightness
Good flexibility
Reduction of the applied effort for bending compared to the one of the PE100 standard
Plastic behaviour in unstable situations
Wide range of diameters and pressure classes (sizing optimisation)
Wide range of fittings and special pieces, both standard and customised
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption ability
Recyclable

Cattura

YOU-TUBE

Blueseal16 – Polypropylene compression fittings

2023-01-25T08:58:02+01:00

COMPRESSION FITTING BLUESEAL

Compression fittings made of polypropylene (PP) for connecting polyethylene (PE) pipes that find application in drinking water pipelines PN16. Fittings are provided with lip seal and anti-slipping crimping rings and the diameters range (DN) goes from 16 to 110 mm. The complete range of compression fittings consists of more than 300 items, including couplings, elbows, Tee pieces (90° C), caps and reductions. Among the various types there are also PE-copper transition fittings, PE-metal universal fittings,  fittings with threaded inserts made of brass and finally, fittings with Viton gasket and PBT crimping ring for usage in presence of acids. When the water pipeline is subjected to pressure, the patented tightness system allows to push the gasket against the pipe wall thanks to the “slide-effect” which increase the tightness level. Blueseal is also available with the O-ring gasket and in blue or black colour.

MAIN FEATURES

High water tightness reliability
Ease and quick installation
Better tightness
Wide range of fittings
High shock absorption ability
Recyclable

YOU-TUBE

Contact Us

    Privacy Policy

    * 1) I declare I read the Privacy policy of this website.
      2) We would like to use your personal data in order to keep you update through e-mails, instant messages, chats or phone calls on news and commercial offers concerning our products and services and the third parties ones, and also concerning other marketing activities mentioned in the C letter. Please note that you can always change your decision and refuse the processing of your personal data for marketing purposes by contacting us through the e-mail address privacy.systemgroup@tubi.net .
      3) We would like to share your personal data with the other companies that belong to “System Group” and the partners in order to be processed for commercial and marketing purposes.

    Go to Top