Tunnels

SG-PVC CABLE – solid wall pipes for cable protection

2024-07-25T15:06:47+02:00

PVC solid wall pipes for cable protection

BRIEF DESCRIPTION

Solid wall pipes made of polyvinyl chloride (PVC-U), available in grey colour (RAL 7021). The diameters range (OD) goes from 50 up to 250 mm. Standard pipes are delivered in 6m lengths with a built-in socket provided with a gasket. Glue connection available on demand. They are used for the construction of underground networks for cables threading.

For Circular Economy goals, pipes can be partially made (on demand) with recycled material, guaranteed by PSV mark (Plastica Seconda Vita – Second Life Plastic).

MAIN FEATURES

Ring stiffness: 450 – 750 N
Impact resistance class: L – N
CEI EN 61386 standard (with IMQ quality mark)
Standard socket connections with sealing lip-gasket made of EPDM (EN 681)
Glue socket connections
High chemical and abrasion resistance
Inert to stray currents
It can be provided with PIPE TRACER, the 3D (altimetric map) tracking system for underground pipelines.

YOU-TUBE

SABDRAIN – ROAD SURFACE PP DRAINAGE CHANNELS

2023-04-12T15:46:00+02:00

SABDRAIN – ROAD SURFACE PP DRAINAGE CHANNELS

BRIEF DESCRIPTION

Drainage channels for road surfaces made of PP (polypropylene), provided with heel guard grids and made of various materials, suitable for all kind of load classes (from A15 pedestrians up to F900 airports). Channels are provided with:

  • in line connection system of interlocking channels, available with a lateral inclination up to 2°
  • predisposition to orthogonal connection system between channels
  • predisposition to exit pipes connection, both sideways and on the floor

On demand:

  • end-line caps
  • baffles for channels connection with change in the amount of ground flow

Grids made of:

  • PP (pedestrian)
  • PAGF
  • galvanised steel
  • stainless steel
  • cast iron

Suitable for:

  • parking areas
  • roads and highways
  • service areas and fuel stations
  • cycle and pedestrian path
  • industrial areas
  • ports
  • airports
  • chemical industries establishments
  • slaughterhouses
  • landfill sites
  • Trails for vehicles entrance (mechanical workshops, garage etc.)

 

 MAIN FEATURES

Application flexibility
Lightweight
Easy and quick to install
High chemical resistance
High abrasion resistance
High thermal shock resistance
Low roughness (excellent hydraulic behaviour)
Excellent mechanical resistance

YOU-TUBE

CERTIFICATES:

SAB

SAB Drain

SGPVC Pressure – PVC solid wall pipes for water pressure networks

2024-08-26T14:02:46+02:00

SGPVC Pressure – PVC solid wall pipes for water pressure networks

BRIEF DESCRIPTION

Solid wall pipes made of polyvinyl chloride (PVC-U), available in grey colour (RAL 7021). The diameters range (OD) goes from 50 up to 500 mm. Standard pipes are delivered in 6m lengths with a built-in socket provided with a gasket. Glue connection available on demand. They are used for the construction of pressurized piping systems (irrigation – water system – plant engineering and other industrial applications).

 MAIN FEATURES

PVC is stabilized with lead-free products (Pb)
Suitable for contact with water for human consumptions
Pressure classes: PN 6 – 10 – 12,5 – 16 – 20
Standard socket connections with lip-gasket sealing made of EPDM (EN 681)
On demand:

– Socket connections with ANGERLOCK gasket type (with hard insert made of PP). Cold insertion (EN 681)
– Socket connections with POWERLOCK gasket type (with hard insert made of PP). Warm insertion (EN 681)

Glue socket connections
Wide range of standard moulded fittings
High chemical and abrasion resistance
Inert to stray currents
It can be provided with PIPE TRACER , the 3D (altimetric map) tracking system for underground pipelines.

YOU-TUBE

SGPVC Sewer – PVC solid wall pipes for sewerage networks

2024-08-26T14:02:57+02:00

SG-PVC Sewer – PVC solid wall pipes for sewerage networks

BRIEF DESCRIPTION

Solid wall pipes made of polyvinyl chloride (U/D-PVC), available in brick-red colour (RAL 8023). The diameters range (OD) goes from 110 up to 500 mm. Standard pipes are delivered in 3 or 6m lengths with a built-in socket provided with a gasket. Glue connection available on demand. They are used for the construction of non-pressurized waste systems, outside the buildings (code: “U”), buried inside the building (code: “D”).

For Circular Economy goals, pipes can be partially made (on demand) with recycled material, guaranteed by PSV mark (Plastica Seconda Vita – Second Life Plastic).

MAIN FEATURES

Ring stiffness: SN 2 – 4 – 8
“ICE” certification (impact resistance test at -10°C for installation in cold climates) with marking☸
Standard socket connections with sealing lip-gasket made of EPDM (EN 681)

On demand:
– Socket connections with DINLOCK gasket type (with hard insert made of PP). Cold insertion (EN 681)
– Socket connections with POWERLOCK gasket type (with hard insert made of PP). Warm insertion (EN 681)
– Glue socket connections

PSV mark (Plastica Seconda Vita – Second Life Plastic) on demand)
High chemical and abrasion resistance
Inert to stray currents
It can be provided with PIPE TRACER , the 3D (altimetric map) tracking system for underground pipelines.
Wide range of standard moulded fittings

YOU-TUBE

NO FIRE – Fire and environmental protection system in the tunnels

2023-11-07T16:41:25+01:00

NO FIRE – Fire and environmental protection system in the tunnels

BRIEF DESCRIPTION

NO FIRE is the system implemented in the collection of liquids that could be found on the road surfaces of tunnels.
It has a dual purpose: protects the environment from accidental spilled liquids and reduces the potential fire spread  through the manifold.
The system consists of several units: NO FIRE storm drains made of two siphons (with a drain grid D400 load class) + standard PP corrugated pipes (other can be used on request) + water treatment system.
The NO FIRE system was designed and developed to satisfy all safety standards (in terms of personal and environment) requested by recent road tunnels, the planned ones and the ones that will be upgraded.

MAIN FEATURES & BENEFITS

Safe and tested system;
In conformity with the security standards requested by TERN networks;
Multiple sizes available, for pipes with DN/OD 250-315-400 mm and DN/OD 300-400 mm;
Gravity system (no electromechanical devices);
Environmental safety  in case of fire (no fire and smokes spread in the manifold);
Surface drainage channel: 500 x 270 mm;
Lightweight and ease of installation;
Durability: a cement mortar coating guarantees the functioning of the system in case of fire too;
High chemical and abrasion resistance;
Inert to stray currents;
Excellent benefit-cost ratio;
Full technical support by the U. T. System Group.

YOU-TUBE

CERTIFICATES:

FUTURA

BureauVeritas

Contact Us

    Privacy Policy

    * 1) I declare I read the Privacy policy of this website.
      2) We would like to use your personal data in order to keep you update through e-mails, instant messages, chats or phone calls on news and commercial offers concerning our products and services and the third parties ones, and also concerning other marketing activities mentioned in the C letter. Please note that you can always change your decision and refuse the processing of your personal data for marketing purposes by contacting us through the e-mail address privacy.systemgroup@tubi.net .
      3) We would like to share your personal data with the other companies that belong to “System Group” and the partners in order to be processed for commercial and marketing purposes.

    Go to Top