Water Supply

PE STEEL transition fittings

2024-10-09T10:29:01+02:00

PE STEEL transition fittings

BRIEF DESCRIPTION

PE-STEEL transition fittings, consisting of a SDR11 polyethylene sleeve (PE100) in accordance with UNI EN 1555 (for gas) or UNI EN 12201 (for water) standards which is suitable for the connection with PE 100 pipes (S5 for gas – PN16 for water) + a steel sleeve made of pipes in accordance with UNI 8863 standard, galvanised on the inside and with male threaded end or suitable for the welding connection. These fittings are used for underground fluids distribution systems (usually PE) which become above ground systems. These last ones are preferred to be made of steel for the advanced mechanical characteristics of impact resistance (accidents or acts of vandalism). The range of shapes includes: straight or elbow (45°- 90°). Transition fittings of PE-BRASS are available too.

MAIN FEATURES

Safety
Wide range of professional choices
Lightness
Practicality

YOU-TUBE

Injected moulded fittings for solid wall HDPE pipes

2024-10-09T16:09:45+02:00

Injected moulded fittings for solid wall HDPE pipes

BRIEF DESCRIPTION

Injected HDPE moulded pieces for high density polyethylene pipes, with a smooth inner surface. The pieces are available in black colour and they can be connected trough butt-welding, with electrofusion fittings or mechanical fittings. SDR 17-11-7,4 range. They are used for the construction of systems for the fluids transport up to 25 bar pressure.

MAIN FEATURES

Wide range of shapes and diameters
Reliability
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption capacity
Recyclable

YOU-TUBE

Electrofusion fittings Sabfuse

2024-10-09T15:59:31+02:00

Electrofusion fittings Sabfuse

BRIEF DESCRIPTION

PE100 Electrofusion fittings for connecting elements of polyethylene pipes (coils, bars, folders with flanges, special pieces) with pressurized and non-pressurized pipelines for the distribution of gas and water (for human consumption too). The electrofusion fittings have an inner metallic thread that, thanks to the passage of electricity, generates the heat requested for the fusion of the polyethylene in the inner surface of the fitting and the outer surface of the pipe, thus allowing the welding between the two elements. This operation takes place through welding machines, powered by specific generators connected to the fitting through cables inside the specific pins. There are also the “fusion witnesses” which are useful for the visual inspection of the properly fusion. The installation instructions can be read automatically by the device trough the barcode reported on every single fitting. Wide range of shapes (sleeves, bends, derivations, TEE pieces etc..) and diameters to work at nominal pressures of 6, 10, 16 and 25 bars.

MAIN FEATURES

Complete system
High tightness reliability
Fusion on the outer surface of the pipe (the inner welding seam is not created)
Suitable for pressurized and non-pressurized systems, up to 25 bar

Blueseal16 – Polypropylene compression fittings

2024-10-09T09:33:02+02:00

COMPRESSION FITTING BLUESEAL…

Compression fittings made of polypropylene (PP) for connecting polyethylene (PE) pipes that find application in drinking water pipelines PN16. Fittings are provided with lip seal and anti-slipping crimping rings and the diameters range (DN) goes from 16 to 110 mm. The complete range of compression fittings consists of more than 300 items, including couplings, elbows, Tee pieces (90° C), caps and reductions. Among the various types there are also PE-copper transition fittings, PE-metal universal fittings,  fittings with threaded inserts made of brass and finally, fittings with Viton gasket and PBT crimping ring for usage in presence of acids. When the water pipeline is subjected to pressure, the patented tightness system allows to push the gasket against the pipe wall thanks to the “slide-effect” which increase the tightness level. Blueseal is also available with the O-ring gasket and in blue or black colour.

MAIN FEATURES

High water tightness reliability
Ease and quick installation
Better tightness
Wide range of fittings
High shock absorption ability
Recyclable

YOU-TUBE

PE 100 DCR+RC Pipe

2024-07-02T09:28:20+02:00

PE 100 DCR PIPE

SPECIFICATION ITEM

Pipe in PE – RD (Resistant to Chlorine Dioxide).

TECHNICAL SPECIFICATION

High density polyethylene pipes entirely made of PE100 resin (MRS ≥ 10 MPa) with high resistance to chlorine components (Clo2) dissolved in water, fully complying with the standard EN 12201. The marking shall report in full the code of the raw material used for the production of the pipe, as well as other elements required by the reference standards.

 

 

Thus EUROPE DCR emerges, and provides additional value to the pipe while increasing its longevity also, against the degrading effects of chlorine. Expectations of durability of operation of these pipes stretch significantly, increasing the value and management efficiency of the networks.

DEVELOPMENT OF THE PRODUCT

The term RD (Resistant to Chlorine Dioxide) refers to PE100 pipes with higher durability against the degrading activity of chlorine (Clo2) and other chlorine agents, the latter one being increasingly used for the sanitation of drinking water.

 

FEATURES AND ADVANTAGES

  • High tensile strength
  • High resistance to chlorine aging effect
  • Higher durability for the transport of drinking water
  • Economies: lower costs for maintenance and repair

Geolocation and referencing system for underground networks – Pipe Tracer

2024-07-04T08:49:23+02:00

Geolocation and referencing system for underground networks – Pipe Tracer

GENERAL DESCRIPTION

High-precision geolocation system + referencing of underground network infrastructures, to be positioned on the outer upper generatrix of the pipes during installation. The system is composed of:

  • A small steel cable completely coated with polyethylene to be isolated and protected from the aggressiveness of the surrounding environment (soil pH, stray currents, water)
  • Straight and TEE connectors for watertight connections between the cables
  • Plastic connection boxes for the introduction of the electromagnetic signal, equipped with two stainless steel fins to allow grounding
  • Connection jack to the connection box for the introduction of the electromagnetic signal
  • Small cast iron terminal manholes to house the individual connection boxes when placed on pedestrian or vehicular pathways
  • “WBH”* plastic frames, fixable to cement, plastic walls (manholes, valves and water meter boxes), or poles, for positioning and securing the connection boxes and grounding connection
  • RFID (Radio Frequency Identification) tags – on request – for recording and reading of referencing information of individual network sections, placed inside the cast iron terminal manholes or on the WBH frame

The installed system remains passive throughout its lifetime but can be activated at any time by introducing an electromagnetic signal from any connection box via a specific generator (external portable). This condition makes the cable continuous sly traceable by appropriate instruments (available on the market in various brands and types) with a high degree of precision, obtaining 3D GPS coordinates. The RFID tags are writable and readable with specific instruments or simple smartphones equipped with NFC technology.

* WBHWall Box Holder

MAIN FEATURES

High degree of 3D localization accuracy
Creation of precise underground maps
Enhanced safety for construction workers
Reduced intervention times when necessary
Deterrent against negligent installation (exact detection of position and depth of buried pipes)
Durability (chemical and electrical inertia)
Suitable for any type of material, shape, and size of buried pipes
Electromagnetic signal suitable for any type of service (water, gas, energy, telephony, optical fibers, etc.)
Ease and speed of installation
Specialized watertight fittings
Referencing system for individual sections of pipelines

Components

The Pipe Tracer geolocation system brings significant operational advantages to utilities, impacting moderately on the extra cost for project execution borne by the contractor. It represents an optimal trade-off between costs and benefits.

In this regard, companies SOLIMENO, BICICCHI, and CERAGIOLI have won important tenders in the TUSCANY REGION by proposing this innovative system for georeferencing underground pipelines to contracting authorities (GAIA and NUOVE ACQUE). Network managers also need to carry out fast and cost-effective interventions while minimizing disruption to the populations in affected areas (excavations on roads and/or sidewalks), thereby avoiding damage to other underground infrastructures and service interruptions.

With Pipe Tracer, there is effectively a perfectly traceable infrastructure mapped in terms of both plan and altitude (3D coordinates), with a high degree of precision, regardless of the type, diameter, and material of the pipes to be traced. This ensures the operators to avoid any damages to the existing buried networks.

References

TUSCANY REGION

[dicembre 4th, 2019|Products FocusReferences]

Repair clamps

2021-07-22T13:22:07+02:00

Repair clamps

BRIEF DESCRIPTION

Repair clamps for failures on pipes with flat outer surface, either plastic, stone or metal. They consist of fixing elements of cast iron with clamping screws and bolts of galvanised steel, and a stainless steel band with a NBR rubber surface on the inside for winding the pipe where the failure is located. Diameters range from DN 16 up to DN 750 mm. Clamps  are used for temporary repairs on pipes that are used for water or gas distribution with or without pressure. Upon request, it is possible to take into consideration the production of models for customised diameters.

MAIN FEATURES

Application flexibility
Easy and quick to use
Reliability
Wide range of sizes and performances

YOU-TUBE

Injected moulded fittings for solid wall HDPE pipes

2022-06-20T18:11:05+02:00

Injected moulded fittings for solid wall HDPE pipes

BRIEF DESCRIPTION

Injected HDPE moulded pieces for high density polyethylene pipes, with a smooth inner surface. The pieces are available in black colour and they can be connected trough butt-welding, with electrofusion fittings or mechanical fittings. SDR 17-11-7,4 range. They are used for the construction of systems for the fluids transport up to 25 bar pressure.

MAIN FEATURES

Wide range of shapes and diameters
Reliability
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption capacity
Recyclable

YOU-TUBE

Electrofusion fittings Sabfuse

2022-08-10T10:53:13+02:00

Electrofusion fittings Sabfuse

BRIEF DESCRIPTION

PE100 Electrofusion fittings for connecting elements of polyethylene pipes (coils, bars, folders with flanges, special pieces) with pressurized and non-pressurized pipelines for the distribution of gas and water (for human consumption too). The electrofusion fittings have an inner metallic thread that, thanks to the passage of electricity, generates the heat requested for the fusion of the polyethylene in the inner surface of the fitting and the outer surface of the pipe, thus allowing the welding between the two elements. This operation takes place through welding machines, powered by specific generators connected to the fitting through cables inside the specific pins. There are also the “fusion witnesses” which are useful for the visual inspection of the properly fusion. The installation instructions can be read automatically by the device trough the barcode reported on every single fitting. Wide range of shapes (sleeves, bends, derivations, TEE pieces etc..) and diameters to work at nominal pressures of 6, 10, 16 and 25 bars.

MAIN FEATURES

Complete system
High tightness reliability
Fusion on the outer surface of the pipe (the inner welding seam is not created)
Suitable for pressurized and non-pressurized systems, up to 25 bar

PE STEEL transition fittings

2021-07-22T14:49:33+02:00

PE STEEL transition fittings

BRIEF DESCRIPTION

PE-STEEL transition fittings, consisting of a SDR11 polyethylene sleeve (PE100) in accordance with UNI EN 1555 (for gas) or UNI EN 12201 (for water) standards which is suitable for the connection with PE 100 pipes (S5 for gas – PN16 for water) + a steel sleeve made of pipes in accordance with UNI 8863 standard, galvanised on the inside and with male threaded end or suitable for the welding connection. These fittings are used for underground fluids distribution systems (usually PE) which become above ground systems. These last ones are preferred to be made of steel for the advanced mechanical characteristics of impact resistance (accidents or acts of vandalism). The range of shapes includes: straight or elbow (45°- 90°). Transition fittings of PE-BRASS are available too.

MAIN FEATURES

Safety
Wide range of professional choices
Lightness
Practicality

YOU-TUBE

Segmented fittings for solid wall HDPE pipes

2022-06-17T10:29:43+02:00

Segmented fittings for solid wall HDPE pipes

BRIEF DESCRIPTION

Fittings and special pieces consisting of sectors of high density polyethylene pipes with solid and smooth wall. They are available in black colour (with or without external coextruded coloured bands), in 2 layers (black on the inside and coloured on the outside) or coloured on the inside. The diameters range goes from 20 up to 1200 mm and of every kind of SDR.

MAIN FEATURES

Good drainage capacity
Pre-installed external filter sock
Cost-effective installation
Lightweight
Wide range of diameters
Inert to stray currents
High chemical resistance (ISO /TR 10358)
High abrasion resistance
High shock absorption resistance
Recyclable

YOU-TUBE

CERTIFICATES:

IDROWELL – PVC solid wall pipes for boreholes

2024-07-01T15:06:33+02:00

IDROWELL – PVC solid wall pipes for boreholes

BRIEF DESCRIPTION

Solid wall pipes made of polyvinyl chloride (PVC) with smooth inner and outer surface, available in light blue colour (RAL 5012). The diameters range goes from (OD) 125 up to 500 mm, and pipes are delivered in bars of 3-5 m length, with glue socket connection system or with threaded male and female. This product is also available in these two versions:

  • Slotted pipe for water collection
  • With coating of pre-installed sock filter made of non-woven fabric

Pipes are used for coating boreholes for water extraction

MAIN FEATURES

PVC is stabilised with lead-free products (Pb)
Suitable for contact with water for human consumptions (D.M. n. 174 of April 6th 2004)
Glue socket connections
Connections made through threaded ends tightening
High chemical resistance
Inert to stray currents

YOU-TUBE

PVC BUILDING – PVC solid wall pipes for building applications

2023-07-20T08:24:30+02:00

PVC BUILDING – PVC solid wall pipes for building applications

BRIEF DESCRIPTION

Solid wall pipes made of polyvinyl chloride (PVC) with smooth inner and outer surface, available in orange colour (RAL 2008). ). The diameters range goes from (OD) 40 up to 400 mm, and pipes are delivered in bars of 3-2-1 m length, with glue socket connection system. Pipes are used for non-pressurized gas unloading and distribution systems inside buildings or buried near the building structure.

MAIN FEATURES

Glue socket connection system
Wide range of standard moulded fittings
High chemical and abrasion resistance
Inert to stray currents

YOU-TUBE

SGPVC Pressure – PVC solid wall pipes for water pressure networks

2024-08-26T14:02:46+02:00

SGPVC Pressure – PVC solid wall pipes for water pressure networks

BRIEF DESCRIPTION

Solid wall pipes made of polyvinyl chloride (PVC-U), available in grey colour (RAL 7021). The diameters range (OD) goes from 50 up to 500 mm. Standard pipes are delivered in 6m lengths with a built-in socket provided with a gasket. Glue connection available on demand. They are used for the construction of pressurized piping systems (irrigation – water system – plant engineering and other industrial applications).

 MAIN FEATURES

PVC is stabilized with lead-free products (Pb)
Suitable for contact with water for human consumptions
Pressure classes: PN 6 – 10 – 12,5 – 16 – 20
Standard socket connections with lip-gasket sealing made of EPDM (EN 681)
On demand:

– Socket connections with ANGERLOCK gasket type (with hard insert made of PP). Cold insertion (EN 681)
– Socket connections with POWERLOCK gasket type (with hard insert made of PP). Warm insertion (EN 681)

Glue socket connections
Wide range of standard moulded fittings
High chemical and abrasion resistance
Inert to stray currents
It can be provided with PIPE TRACER , the 3D (altimetric map) tracking system for underground pipelines.

YOU-TUBE

PE 80 pipe for pressurized water networks

2021-07-22T11:09:46+02:00

PE 80 pipe for pressurized water networks

BRIEF DESCRIPTION

Solid wall pipes made of PE 80 (MRS 8 MPa – σS 6,3 MPa) with a smooth inner and outer surface, available in black colour (with or without external coextruded coloured stripes) or completely blue. Diameters (OD) go from 20 up to 1200 mm. Pipes can be delivered in coils and bars.

MAIN FEATURES

100% permanent water tightness
Good bending properties, particularly appreciated in manual applications in colder climate
Low modulus of elasticity
Plastic behavior in unstable circumstances
Wide range of diameters and pressure classes (sizing optimization)
Wide range of fittings and special pieces, standard and customized
Related to aqueducts, this pipe is in conformity with the EN 1622 standard about “determination of threshold of smell and taste”
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption capacity
Recyclable

YOU-TUBE

Solid wall PE 100 pipes for pressurized water networks

2024-07-02T09:26:18+02:00

Solid wall PE 100 pipes for pressurized water networks

BRIEF DESCRIPTION

Solid wall pipes made of PE 100 (MRS 10 MPa – σS 8 MPa) with a smooth inner and outer surface, available in black colour (with or without external coextruded coloured stripes) or completely blue.
Diameters (OD) go from 20 up to 1200 mm. Pipes can be delivered in coils or bars.

MAIN FEATURES

100% permanent and watertight seal
Pliability
Wide range of dimension and performance choice
Very high chemical, electrical and biological resistance
High abrasion resistance
Low elasticity modulus
Plastic behavior in unstable situations
Reduced number of joints
System Homogeneity
Lightness
More resistant to chemical agents compared to other materials
Security
Savings
Recyclable

YOU-TUBE

DCR – Solid wall PE 100 DCR pipes for chlorinated water networks

2024-07-02T09:27:59+02:00

DCR – Solid wall PE 100 DCR pipes for chlorinated water networks

BRIEF DESCRIPTION

Solid wall pipes made of PE 100 DCR (MRS 10 MPa – σS 8 MPa) with an inner and outer smooth surface, available in black colour (with or without external coextruded coloured stripes). The diameters range (OD) goes from 20 up to 1200 mm and pipes can be delivered in coils and bars. They are highly resistant to chlorine disinfectants used in water for human consumption.

MAIN FEATURES & BENEFITS

High resistance to chlorine aging effects DCR (Dioxide Chlorine Resistant)
100% permanent water tightness
Good bending properties
Plastic behaviour in unstable situations
Wide range of diameters and pressure classes (sizing optimization)
Wide range of fittings and special pieces, standard and customized
Related to aqueducts, this pipe is in conformity with the EN 1622 standard about “determination of threshold of smell and taste”
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption capacity
Recyclable

YOU-TUBE

CERTIFICATES:

EuroPas Evolution Solid wall PE 100 RC pipes (Resistant to Crack) type 1

2024-07-02T09:26:52+02:00

EuroPas Evolution – Solid wall PE 100 RC pipes (Resistant to Crack) type 1

BRIEF DESCRIPTION

Black high density polyethylene (HDPE) PE100 RC pipes (type1), with co-extruded blue stripes, for the transport of pressure water, for human consumption too, with product quality mark in compliance with (UNI) EN 12201-2 standard issued by an accredited independent organization according to UNI CEI EN ISO / IEC 17065/2012 and UNI CEI EN ISO / IEC 17020/2012 (certification of product conformity), and certified DIN PLUS in compliance with PAS 1075 technical standard.

MAIN FEATURES

Designed for trenchless tech. Installations
Higher service efficiency
More resistant to chemical agents
Compared to other materials
Longer life-span
Reduction / elimination of maintenance
Lower network management costs
Less disruption to users
Pipes completely compliant to the official standards
Correspondent to all types of connections
Advantageous cost/benefit ratio
Savings

YOU-TUBE

EUROPAS SAFE10 Solid wall PE 100 RC pipes (Resistant to Crack) type 2

2024-07-02T09:27:15+02:00

EUROPAS SAFE10 Solid wall PE100 RC pipes (Resistant to Crack) type 2

BRIEF DESCRIPTION

High density polyethylene (HDPE) PE100 RC pipes, made with black inner layer (90%) and with blue outer layer (10%) – type 2, for the transport of pressure water, for human consumption too, with product quality mark in compliance with (UNI) EN 12201-2 standard issued by an accredited independent organization according to UNI CEI EN ISO / IEC 17065/2012 and UNI CEI EN ISO / IEC 17020/2012 (certification of product conformity), and certified DIN PLUS in compliance with PAS 1075 technical standard.

MAIN FEATURES

Detection of obligation to repair damage
When deeper than the colored external wall
Reduction / elimination of maintenance
Lower network management costs
Higher service efficiency
Less problems for final users
Longer life-span
Pipes completely compliant to the various standards
Correspondent to all types of connections
Suitable for no-dig
More resistant to chemical agents
Advantageous cost/benefit rapport
Savings

YOU-TUBE

Plug&Play – coupler/socket for PE pressure pipes

2024-07-02T09:28:46+02:00

Plug&Play – coupler/socket for PE pressure pipes

BRIEF DESCRIPTION

Push-to-connect double coupler made of polypropylene (PP) for PE pipes up to PN16, provided with double lip sealing gaskets and special anti-slipping rings. Elbow and tee shapes are available too. The diameters range (DN) goes from 20 up to 250 mm (OD pipes), but is also possible to request reduced sizes. The range for PE100 PN16 pipes from ɸ 20 to 63 mm requires the adoption of a “pipe liner” inside the end of the pipe to be connected. The socket version is made of PE from DN 90 up to 250 mm (PN 16-10), then butt-welded on one end of the pipe in the factory before the shipment (on-site welding is possible too).

MAIN FEATURES

High tightness reliability
Easy and fast to install
Wide range of diameters
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High shock absorption capacity
Recyclable

 

YOU-TUBE

PE100 FLEX – PE100 PIPES WITH LOW APPLIED EFFORT FOR BENDING

2024-07-02T09:29:15+02:00

PE100 FLEX – PE100 PIPES WITH LOW APPLIED EFFORT FOR BENDING.

BRIEF DESCRIPTION

Solid wall pipes made of high density polyethylene, PE 100 (MRS 10 MPa – σS 8,0 MPa) with inner and outer smooth surface, available in black colour (with or without coextruded coloured stripe on the outer surface) with low applied effort for bending. The diameters range (OD) goes from 20 up to 1200 mm and pipes are delivered in coils and bars. They find application in pressurized and non-pressurized water systems.

MAIN FEATURES

100% permanent watertightness
Good flexibility
Reduction of the applied effort for bending compared to the one of the PE100 standard
Plastic behaviour in unstable situations
Wide range of diameters and pressure classes (sizing optimisation)
Wide range of fittings and special pieces, both standard and customised
Inert to stray currents
High chemical resistance (ISO/TR 10358)
High abrasion resistance
High shock absorption ability
Recyclable

Cattura

YOU-TUBE

Blueseal16 – Polypropylene compression fittings

2023-01-25T08:58:02+01:00

COMPRESSION FITTING BLUESEAL

Compression fittings made of polypropylene (PP) for connecting polyethylene (PE) pipes that find application in drinking water pipelines PN16. Fittings are provided with lip seal and anti-slipping crimping rings and the diameters range (DN) goes from 16 to 110 mm. The complete range of compression fittings consists of more than 300 items, including couplings, elbows, Tee pieces (90° C), caps and reductions. Among the various types there are also PE-copper transition fittings, PE-metal universal fittings,  fittings with threaded inserts made of brass and finally, fittings with Viton gasket and PBT crimping ring for usage in presence of acids. When the water pipeline is subjected to pressure, the patented tightness system allows to push the gasket against the pipe wall thanks to the “slide-effect” which increase the tightness level. Blueseal is also available with the O-ring gasket and in blue or black colour.

MAIN FEATURES

High water tightness reliability
Ease and quick installation
Better tightness
Wide range of fittings
High shock absorption ability
Recyclable

YOU-TUBE

Contact Us

    Privacy Policy

    * 1) I declare I read the Privacy policy of this website.
      2) We would like to use your personal data in order to keep you update through e-mails, instant messages, chats or phone calls on news and commercial offers concerning our products and services and the third parties ones, and also concerning other marketing activities mentioned in the C letter. Please note that you can always change your decision and refuse the processing of your personal data for marketing purposes by contacting us through the e-mail address privacy.systemgroup@tubi.net .
      3) We would like to share your personal data with the other companies that belong to “System Group” and the partners in order to be processed for commercial and marketing purposes.

    Go to Top