Gulleys

MAGNUM PERFORMANTE SN10 CORRUGATED SEWER PIPE
Gallery

MAGNUM PERFORMANTE SN10 CORRUGATED SEWER PIPE

2025-01-17T09:57:21+01:00

MAGNUM PERFORMANTE SN10 CORRUGATED SEWER PIPE

BRIEF DESCRIPTION

Double wall corrugated pipes made of high density polyethylene (HDPE) with a smooth inner surface and a corrugated outer one, available in black colour.

Pipes are in compliance with EN 13476-3, but with an increased thickness of the inner smooth wall to get long-lasting durability against the abrasion.
The Outer Diameter (OD) goes from 315 up to 400 mm, pipes are delivered in bars.

MAIN FEATURES

Longer long-lasting durability compared to standard corrugated pipes
Ring stiffness: SN 10 certified
Very smooth on the inside, corrugated on the outside
Socket/coupling connections with single/double sealing gasket
Lightweight and easy installation
High chemical and abrasion resistance
Inert to stray currents
Recyclable

YOU-TUBE

CERTIFICATES:

ITALIANA CORRUGATI

BV MAGNUM PERFORMANTE

PE100 solid wall pipes for firefighting system
Gallery

PE100 solid wall pipes for firefighting system

2025-02-12T09:39:08+01:00

PE100 SOLID WALL PIPES FOR FIRE FIGHTING SYSTEMS

High-Density Polyethylene PE100 Pipes with Smooth Solid Wall for Firefighting Hydraulic Systems.
The pipes are:

  • Black in color, with or without co-extruded red (or blue or brown) stripes on the outer surface.
  • Equipped with a product conformity mark to the UNI EN 12201-2 and/or ISO 4427-2 standard, issued by a third-party certification body accredited according to UNI CEI EN ISO/IEC 17065.
  • Made with homogeneous, pigmented, and stabilized resin in granule form at origin.
  • SDR …, pressure class Psi …
  • The marking includes the product quality mark, along with the code of the raw material used and all other elements required by the relevant standard.

CERTIFICATES:

CENTRALTUBI

FM APPROVED n.PR453811

CorPress – double shell mechanical joint for corrugated pipes with high sealing performances
Gallery

CorPress – double shell mechanical joint for corrugated pipes with high sealing performances

2025-02-17T15:06:23+01:00

CorPress – double shell mechanical joint for corrugated pipes with high sealing performances

BRIEF DESCRIPTION

Mechanical double-shell joint with high-performance gasket for corrugated pipes (in PE and PP). The outer part is made of polypropylene (PP), while the inner surface is made of TPE, designed to adhere to the entire corrugated outer surface of the pipes to be connected. This enhances the hydraulic sealing performance compared to traditional systems and adds additional pull-out resistance, which is particularly useful in certain applications and/or installation methods. The connection between the two shells that make up the joint is made on-site using stainless steel screws and bolts, which must be properly assembled and tightened according to the manufacturer’s specifications.

NOTE: The corrugated shape of the TPE inner wall of the CorPress joints has been designed and manufactured based on the external geometries of the corrugated pipes produced by the System Group companies mentioned in this product sheet. Therefore, no sealing guarantee can be provided if used on corrugated pipes produced by other manufacturers.

MAIN FEATURES

  • High sealing reliability
  • Easy installation
  • Pull-out resistance function
  • Formation of repair kits
  • Suitable for vertical wall or overhead installations (e.g., bridges and viaducts)
  • High impact absorption capacity

YOU-TUBE

CERTIFICATES:

FUTURA SYSTEMS

APPLUS CORPRESS JOINTS

Hydro16 PP corrugated pipes for Non-pressure networks

Hydro16 PP corrugated pipes for Non-pressure networks

2024-06-20T17:28:37+02:00

Hydro16 PP corrugated pipes for Non-pressure networks

BRIEF DESCRIPTION

Double wall corrugated pipes made of polypropylene (PP) for non-pressure systems, with a smooth and orange inner surface and a corrugated black outer one. The range of Outer Diameters (DN/OD) goes from 200 up to 1200 mm, while the range of Inner Diameters (DN/ID) goes from 250 up to 1000 mm. Pipes are delivered in bars.


MAIN FEATURES

High ring stiffness: SN 16
Wide range of diameters
Socket or coupling connections with gasket
Lightweight and easy to install
High chemical and abrasion resistance
Inert to stray currents
Recyclable

YOU-TUBE

CERTIFICATES:

ITALIANA CORRUGATI

BUREAU VERITAS

IIP CERT.

UKRAINIAN CERTIFICATION

NO FIRE – Fire and environmental protection system in the tunnels

NO FIRE – Fire and environmental protection system in the tunnels

2023-11-07T16:41:25+01:00

NO FIRE – Fire and environmental protection system in the tunnels

BRIEF DESCRIPTION

NO FIRE is the system implemented in the collection of liquids that could be found on the road surfaces of tunnels.
It has a dual purpose: protects the environment from accidental spilled liquids and reduces the potential fire spread  through the manifold.
The system consists of several units: NO FIRE storm drains made of two siphons (with a drain grid D400 load class) + standard PP corrugated pipes (other can be used on request) + water treatment system.
The NO FIRE system was designed and developed to satisfy all safety standards (in terms of personal and environment) requested by recent road tunnels, the planned ones and the ones that will be upgraded.

MAIN FEATURES & BENEFITS

Safe and tested system;
In conformity with the security standards requested by TERN networks;
Multiple sizes available, for pipes with DN/OD 250-315-400 mm and DN/OD 300-400 mm;
Gravity system (no electromechanical devices);
Environmental safety  in case of fire (no fire and smokes spread in the manifold);
Surface drainage channel: 500 x 270 mm;
Lightweight and ease of installation;
Durability: a cement mortar coating guarantees the functioning of the system in case of fire too;
High chemical and abrasion resistance;
Inert to stray currents;
Excellent benefit-cost ratio;
Full technical support by the U. T. System Group.

YOU-TUBE

CERTIFICATES:

FUTURA

BureauVeritas

MAGNUM HDPE double wall corrugated pipe for non-pressure networks
Gallery

MAGNUM HDPE double wall corrugated pipe for non-pressure networks

2024-07-02T09:32:59+02:00

MAGNUM HDPE double wall corrugated pipe for non-pressure networks

BRIEF DESCRIPTION

Double wall corrugated pipes made of high density polyethylene (HDPE) with a smooth inner surface and a corrugated outer one, available in black colour.
The Outer Diameter (OD) goes from 125 up to 1200 mm, while the Inner Diameter (ID) goes from 250 up to 1000 mm. Pipes are delivered in bars.

MAIN FEATURES

Wide range of diameters
Ring stiffness: SN 4-8
Smooth on the inside and corrugated on the outside
Socket or coupling connections with double sealing gasket
Lightweight and easy installation
High chemical and abrasion resistance
Inert to stray currents
Recyclable

YOU-TUBE

CERTIFICATES:

ITALIANA CORRUGATI

BV MAGNUM BLACK

BV MAGNUM ITALCOR PE

BV MAGNUM ITALCOR PP

IIP Cert.n°2004 Rev.0_ITALCOR MAGNUM

IIP Cert.n°2006 Rev.0_ITALCOR MAGNUM

PIIP Cert.n°2003 Rev.0_tipo B MAGNUM

PIIP Cert.n°2001 Rev.0 tipo B MAGNUM

PIIP Cert.n°2002 Rev.0 tipo B MAGNUMV

UKRAINIAN CERTIFICATION

ÖNORM

LUCANIA

IIP UNI EN 13476-3 1802

FUTURA SYSTEMS

CERTIFICADO APPLUS MAGNUM INGLESE

VALIDATION MAGNUM SN8 + CORPRESS

VALIDATION ONAS MAGNUM SN8 + CORPRESS

SYSTEM GROUP FRANCE

IIP NF EN 13476 3

NF CSTB PREMIUM

Contact Us

    Privacy Policy

    * 1) I declare I read the Privacy policy of this website.
      2) We would like to use your personal data in order to keep you update through e-mails, instant messages, chats or phone calls on news and commercial offers concerning our products and services and the third parties ones, and also concerning other marketing activities mentioned in the C letter. Please note that you can always change your decision and refuse the processing of your personal data for marketing purposes by contacting us through the e-mail address privacy.systemgroup@tubi.net .
      3) We would like to share your personal data with the other companies that belong to “System Group” and the partners in order to be processed for commercial and marketing purposes.

    logo
    Headquarter:
    Centraltubi Via Foglia 11, Lunano, 61026 (PU) Italy
    The company is subject to the direction and coordination of HB Boscarini S.p.A.
    Phone: +39 0722 70011
    Fax: +39 0722 70402
    Email address: info@tubi.net
    WhatsApp chat
    Go to Top